Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Trans insulator installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trans insulator installation

    I ordered an insulator for my Flight-o-matic and tried to install it today I winded up tearing it up because it just would not go into the hole on the lever. I cut most of the lip off of it and got in into the hole however even after I adjusted the shift rod it would not go into park. It will go into park if I move the lever from under the car just not by the gear shift inside[V]I don't know what to try next, anyone ever have this problem?

    Studebakers forever!
    Studebakers forever!

  • #2
    That pretty much narrows it down to wear on the Detent housing under the steering wheel, the shift tube, the shift lever or the lever on the column under the hood!

    StudeRich
    Studebakers Northwest
    Ferndale, WA
    StudeRich
    Second Generation Stude Driver,
    Proud '54 Starliner Owner

    Comment

    Working...
    X