Announcement

Collapse
No announcement yet.

Adapting M 5 temperature gage to Stude V8.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pszikszai
    replied
    Thanks.
    I found the same at vendor Tom Karkiewitz.
    Paul

    Leave a comment:


  • jjones
    replied
    I have the original M5 temperature gauge hooked up to the 259 in my
    M. I used a standard 1/2-inch pipe to mechanical sending unit adapter for modern guages. As far as I know, they are all the same and should be available at any FLAPS that has a decent counter person.

    Hope this helps

    Jeff

    Leave a comment:


  • pszikszai
    started a topic Adapting M 5 temperature gage to Stude V8.

    Adapting M 5 temperature gage to Stude V8.


    I am trying to use a temperature gage adapter from a six volt V8 to hook up the temperature gage from the M5. Since this is not an electronic sending unit it requires an adapter that holds the unit in place to avoid water leak.
    If anyone used this set up please tell me what they used.
    Thanks.
    Paul
    pszikszai@aol.com
Working...
X