Announcement

Collapse
No announcement yet.

which way valve springs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Alan
    replied
    The end with the coils closer together goes down. I use the steel jacketed teflon seals, but that is just my preference.

    Leave a comment:


  • Leon
    started a topic which way valve springs

    which way valve springs

    I am rebuilding a OHV 6 cyl. I found a head that tested out with no cracks, so I had hardened seats put on the intake and exhaust. Then I had it cleaned up and new guides put in. I'm hoping it will work out. Anyway, I've gotten new valves and valve springs to put in. The springs have tighter, closer coils at one end. Does the tighter coil end of the spring go up, or down? Also, does anyone recommend any particular valve seal? thanks - Leon
Working...
X