Announcement

Collapse
No announcement yet.

Location of hood brace on A/C GTs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by JoeHall View Post
    /Cut/
    If anyone has a body parts manual, it would be interesting to see if there are different part numbers for props on AC equipped cars.
    See Post #9.
    StudeRich
    Second Generation Stude Driver,
    Proud '54 Starliner Owner

    Comment


    • #17
      Yes Joe that is what I was trying to determine as to which rod is correct. I have seen several A/C GTs and was curious what is CORRECT. I have seen consistency in the placement of additional holes above for the prop rod pivot and clip as well as the retainer clip on the driver's side. The heads of the bolts for the condenser also face out not the nuts. Looking at parts there seems to be 2 different prop rods for the A/C plus the regular one for non-A/C. The commonality of the A/C prop rods is the bend near the center.
      Thanks
      Rob in PA.

      Comment

      Working...
      X