Announcement

Collapse
No announcement yet.

Seatbelt Anchors, Lark...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Other: Seatbelt Anchors, Lark...

    Need to know the thread size and threads per inch.

    Any common over the counter substitutes and sourcing. I need two within a few days.

    TIA...
    Last edited by GrumpyOne; 06-05-2019, 01:00 AM.

  • #2
    Is this a Later Lark ('62-UP) with the threaded Nutplates in the floor? They are Grade 8 Fine Thread NF 3/8" -24 Bolts.
    Last edited by StudeRich; 06-04-2019, 05:02 PM.
    StudeRich
    Second Generation Stude Driver,
    Proud '54 Starliner Owner

    Comment


    • #3
      Originally posted by StudeRich View Post
      Is this a Later Lark ('62-UP) with the threaded Nutplates in the floor? They are Grade 8 Fine Thread NF 3/8" -24 Bolts.
      No, they are not 3/8” threads - they are 7/16” threads.

      Comment


      • #4
        Every seat belt bolt I've ever removed from any american made car has been 7/16-20. They've all had a short unthreaded sholder near the head so the belt bracket is free to rotate on it after the bolt is tight. The bolts, in my '62 GT are 7/16-20.

        Comment


        • #5
          OK they are 7/16" -20 NF.
          StudeRich
          Second Generation Stude Driver,
          Proud '54 Starliner Owner

          Comment


          • #6
            Thanks guys... The rusty Cruiser has one anchor in place while the other three locations have none. Fortunately the floor area where they are located remains in good shape and will suffice for the final ride...

            Comment

            Working...
            X