Zerks

[az64stude]

I think that one is pressed or brazed. I don't believe you can put a socket on it to remove. Also that one has a straight hole with no check valve, so you should be able to take a needle and run it through to clean it out. Good luck

[ColoradoHawk]

For a ‘64 GT Hawk, is the grease fitting (zerk) on the brake pedal pivot under the floor pressed in to the pedal or screwed in? Mine wouldn’t come out when I tried to unscrew it and once I finally got it out, I don’t see any threads on the pedal for one to screw into, just a hole.