Cool/Heat: Temp gauge diameter 63 hawk

[TXmark]

My gauge is faulty, what dia is a replacement 2 1/6?

[Xcalibur]

I don't have one out at the moment. But, as I recall they are just the standard size. I say that in part because I've seen any number of aftermarket replacements used in the stock bezels. All the best.

[StudeRich]

All Years of Hawk Gauges are the Standard SW 2 Inch Case/Hole Size, and 2 1/8" outside Bezel.

This recent String will help:

http://forum.studebakerdriversclub.com/showthread.php?110845-Ohm-s

[bensherb]

Yes they are what is typically refered to as a 2 1/16" gauge. Any standard "small" gauge will fit. These are what I'm using now.

[Jerry Forrester]

And this is what I have.

[Jeffry Cassel]

You can buy a SW temp gage (new) that looks almost like the original. The originals are old and rare now 'cause so many are failing. Don't send it to Bob's!!!