My driver's door will not latch tight no matter where I adjust the striker. It jiggles very loose with about a quarter inch or more of play. The ratchet wheel on the latch that engages the striker is very worn. I can't find a new or used one for a 64 GT Hawk. There are some for 63 Hawks around on some vendors. Is there a difference? Can I make a 63 latch work on a 64?
Announcement
Collapse
No announcement yet.
Will a 63 front door latch for a Hawk work on a 64 Hawk?
Collapse
X
-
Originally posted by jostanton1 View PostMy driver's door will not latch tight no matter where I adjust the striker. It jiggles very loose with about a quarter inch or more of play. The ratchet wheel on the latch that engages the striker is very worn. I can't find a new or used one for a 64 GT Hawk. There are some for 63 Hawks around on some vendors. Is there a difference? Can I make a 63 latch work on a 64?Gary L.
Wappinger, NY
SDC member since 1968
Studebaker enthusiast much longer
-
I send you an answer on a PM
https://www.studebakerparts.com/stud...re/s/agora.cgi
stocks the 1964 latches.
Comment
-
Comment