Announcement

Collapse
No announcement yet.

Champ seat replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • (S)
    replied
    Warren, was that a 'bolt in' ? Cool! and thanks!

    Leave a comment:


  • Warren Webb
    replied
    When I first got my 61 Champ I replaced the seat with one from a 59 Lark 2 door in order to have easier access to the back of the seat. I am not familiar with earlier models but suspect the seat mounting points are the same. What you can't use on a Champ is a 50/50 or bucket seat because of the rise in the floor for the fuel tank. That portion also requires the wood spacers that you find under the seat track to floor to allow clearance.

    Leave a comment:


  • landriopa
    started a topic Interior: Champ seat replacement

    Champ seat replacement

    I have a 61 Champ that obviously has had its original seat replaced. This seat is now in poor condition with both upholstery and spring problems. Are there any original seats still out there? And/or, are the mounting holes somewhat standard and what else might fit?

    Finally, my first vehicle was a 65 Ford half ton and I liked that it had a folding back allowing easy access to the limited space behind the seat. Are any seats like that suitable for a Champ?
Working...
X