Announcement

Collapse
No announcement yet.

1962 Hawk Jack Placement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • (S)
    replied
    I stock the wing nut, 'clip ' bolt, All loaded up for Tacoma...

    Leave a comment:


  • chet445
    replied
    Thank you those pictures are very helpful. Guess it is fabrication time. Chet

    Leave a comment:


  • 56GH
    replied
    Click image for larger version

Name:	IMG_1353.jpg
Views:	1
Size:	71.6 KB
ID:	1721810Click image for larger version

Name:	IMG_1354.jpg
Views:	1
Size:	80.9 KB
ID:	1721811

    Does this help? This is my 1962 GT Hawk.

    Leave a comment:


  • ColoradoHawk
    replied
    Should be like my ‘63, it’s stored on the right side of the trunk. One end of the jack goes up into the space in the corner of the trunk just above the wheel well. There is a brace on the right side of the trunk where it is secured to with a retaining bracket and a wing nut.
    Click image for larger version

Name:	1D95C924-3AFA-49A9-B187-67B5A051035F.jpg
Views:	1
Size:	19.9 KB
ID:	1721809
    Attached Files
    Last edited by ColoradoHawk; 08-16-2018, 09:27 PM.

    Leave a comment:


  • (S)
    replied
    A bolt holds the base through the tire, and goes into the floor like most cars. The jack 'body' leans on the right fender well. Originally, there was a chunk of foam it rests on , instead of bare metal. A 'clip' held it and the lug wrench via a carrage type bolt and wing nut...

    Somebody has a picture out there.... ? google?

    Leave a comment:


  • chet445
    started a topic Other: 1962 Hawk Jack Placement

    1962 Hawk Jack Placement

    How is the tire jack placed in the trunk and held down? Chet445
Working...
X