Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

P/n 1556178

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rkapteyn
    replied
    This is a picture from eBay , the above #4 post had the wrong attachment.



    1556178

    Leave a comment:


  • bensherb
    replied
    My '62 GT had AC installed at some point and the rod was simply "tweaked" to clear the condenser. All it is, is a pull rod, just get a three foot rod from the hardware store and bend what you need.

    Leave a comment:


  • rkapteyn
    replied
    Get a print at the archives and bend one.

    Leave a comment:


  • PeterHawk
    replied
    Yes, that is the part.

    Leave a comment:


  • 52-fan
    replied
    So you need this piece to properly lock the hood. This picture might help.
    Attached Files

    Leave a comment:


  • PeterHawk
    started a topic Body: P/n 1556178

    P/n 1556178

    I have installed air conditioning in my 1962 GT Hawk using a refurbished 1962 evaporator and brand new "under the hood" stuff from Vintage Air. I have found out that to proper close the hood and keep it latched shut, I need part # 1556178. This part is identified as the "ROD, hood lock operating - K (w/air cond.)" on page 465 of the Chassis Parts Catalog. NOS would be nice or if anybody is parting out a 1962 GT Hawk with factory air and has that part, please advise.
Working...
X