Announcement

Collapse
No announcement yet.

Dip Stick Tube

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rbisacca
    replied
    Here's how it is on my "63 Champ.

    Click image for larger version

Name:	DSCN2705.JPG
Views:	79
Size:	61.0 KB
ID:	1866426
    There's also a good illustration in the parts book.

    Leave a comment:


  • Surfpilot
    replied
    Is this true for the 63 Lark 6 cyl? My dipstick tube fell off, and I’m a little baffled as to how that happened and how to fix it. Doesn’t seem like it would tap in. I guess there was a retainer that’s lost?

    Leave a comment:


  • Joe Tondu
    replied
    Thanks folks. I now see how it fits around the starter.

    Leave a comment:


  • RadioRoy
    replied
    Some of them have a heavy spring steel wire that hooks over the end of the starter.

    Leave a comment:


  • altair
    replied
    Click image for larger version

Name:	DSC08506.JPG
Views:	1
Size:	126.7 KB
ID:	1720430This is a 54 model and it just presses in. Pulling and wiggling will remove it. It is a tap in fit.

    Leave a comment:


  • DieselJim
    replied
    It slides down the dip stick tube then snaps under the rear bearing plate on the starter.

    Leave a comment:


  • Joe Tondu
    started a topic Engine: Dip Stick Tube

    Dip Stick Tube

    On a 1950 Champion 6cyl

    How does one remove the retainer for the dipstick tube? I don't see how it is actually retaining. Any enlightenment would be appreciated. Thanks.
Working...
X