Announcement

Collapse
No announcement yet.

Looking for an air cleaner for 63 GT Hawk 4 bbl. Stock or aftermarket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rbisacca
    replied
    Several years ago I bought a good looking chrome one from good ole J C Whitney. By the amount of dust on the box it appeared not to be a big seller. It came with an adapter and fits perfectly. Best of all it was cheap! Of course it is made in China but I keep it polished and after a few years it shows only minimal corrosion.
    Also, SI sells one as used on the R-1 engine.

    Leave a comment:


  • bensherb
    replied
    If its an AFB 4 7/32", you can get an adapter, https://www.summitracing.com/parts/mrg-2082 ,to fit any of the hunderds of 5 1/8" hole diameter air cleaners available almost everywhere.

    Leave a comment:


  • Mike Van Veghten
    replied
    And the carburetor is.....?
    Lotsa four barrels out there.

    Mike

    Leave a comment:


  • Looking for an air cleaner for 63 GT Hawk 4 bbl. Stock or aftermarket

    Hello all. I need a proper fitting complete breather for my 63. It has an aftermarket that doesn't fit/seal at the base, so is basically useless.
    Any ideas on where to buy one?
    Thanbks
Working...
X