Announcement

Collapse
No announcement yet.

tach wire routing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Studeman
    replied
    Do you have the correct intermediate harness? It runs through the same hole as the main wiring harness (grommet).
    The intermediate harness should be 30" long
    http://ncsdc.com/TechnicalPages/Tachometer.htm

    Ray


    Specializing in Studebaker Restoration

    Leave a comment:


  • Kdancy
    started a topic tach wire routing

    tach wire routing

    Still trying to figure out where the tach wire goes thru the firewall for the 57 GH. The whole wire harness is 24" long and won't reach the tach head if I run it thru the steering column hole like the old made up harness was run. I can't seem to find a firewall hole that is closer to the distributor that works. Should I just go ahead and drill one for the tach harness to run?
    ??
Working...
X