If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
Get more Tips, Specs and Technical Data!
Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
Press on the pedal with your foot, just as you were to apply the brakes. Then start the car. If the pedal drops down about an inch, the booster is okay.
Of course, you need to make sure that there are no vacuum leaks and that the check valve is good, in order for that test to be effective.
========================
63 Avanti R2, 4-Speed, 3.73 TT
Martinez, CA
Comment