Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage:
See more
See less

steering wheel adapter

  • Filter
  • Time
  • Show
Clear All
new posts

  • Alan
    After you go through the hassel of removing the wheel measure the splines and their number. The later cars used 13/16" X 36 spline. Same as early GM power steering. Just for my curiousity and I might be able to steer you in the right direction to find the Grant numbers.

    Leave a comment:

  • sbca96
    I am pretty sure its different then the later cars. You can check
    the Grant website or send them an email to see if they carry it. My
    dad bought a '69 Avanti II years ago the steering wheel was actually
    falling apart. I helped it along by removing all the plastic to
    leave the inner hub/spline. Then we chose a steering wheel that we
    liked (later we realized it was too small - so chose wisely) and I
    used the original hub as an adapter by drilling holes for the Grant
    steering wheel to fit. Later, Grant started selling a Stude adapter.
    So if you can not find one, and your steering wheel its in REALLY bad
    shape like my dads was, you have another option.


    '63 Avanti, zinc plated drilled & slotted 03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, soon: 97 Z28 T-56 6-spd, Ported heads w/SST full flow valves, 'R3' 276 cam, Edelbrock AFB Carb, GM HEI distributor, 8.8mm plug wires

    Leave a comment:

  • hoehnelli
    started a topic steering wheel adapter

    steering wheel adapter

    I am wondering if anyone has used an adapter kit to use an aftermarket steering wheel witha 51 champion? thanks