Announcement

Collapse
No announcement yet.

Some Parts ID please....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Some Parts ID please....

    I have been working on, rebuilding, and restoring Studes for a number of years. I have accumulated lots of "take-off" parts. While sending parts to my new Cad/Zinc Plater- (for cars I have in the shop)... I took some of these extras and had them done too. The problem is... I'm not sure what some of them fit. I have made up a webpage (to save space here), showing the parts and some guesses as to what they are.
    Even the novices among us may have seen some of these and can contribute.



    http://www.ncsdc.com/TEMP/Unknowns.htm

    Plated parts now on eBay: http://motors.search.ebay.com/_W0QQsassZstudeman8tqx

    Thanks,
    Ray


    Specializing in Studebaker Restoration
    Ray

    www.raylinrestoration.com
    Specializing in Studebaker Restoration

  • #2
    I is a radio support rod for 1950-1952 CHAMPION AND COMMANDER>

    L IS THE SPARE TIRE HOLD DOWN BOLT FOR !(%!_%@ CHAMPION AND COMMANDER>

    Comment


    • #3
      I is a radio support rod for 1950-1952 CHAMPION AND COMMANDER>

      L IS THE SPARE TIRE HOLD DOWN BOLT FOR !(%!_%@ CHAMPION AND COMMANDER>

      Comment


      • #4
        Ray,

        Some of these things I'd have to hold in my hands to guess at. N looks like the little keepers that help hold the W/S to the lower edge of C-cab doors. M looks like a bumper washer. I, to me, looks like a battery clamp bolt as is used on a Lark.

        Miscreant adrift in
        the BerStuda Triangle


        1957 Transtar 1/2ton
        1960 Larkvertible V8
        1958 Provincial wagon
        1953 Commander coupe

        No deceptive flags to prove I'm patriotic - no biblical BS to impress - just ME and Studebakers - as it should be.

        Comment


        • #5
          Ray,

          Some of these things I'd have to hold in my hands to guess at. N looks like the little keepers that help hold the W/S to the lower edge of C-cab doors. M looks like a bumper washer. I, to me, looks like a battery clamp bolt as is used on a Lark.

          Miscreant adrift in
          the BerStuda Triangle


          1957 Transtar 1/2ton
          1960 Larkvertible V8
          1958 Provincial wagon
          1953 Commander coupe

          No deceptive flags to prove I'm patriotic - no biblical BS to impress - just ME and Studebakers - as it should be.

          Comment


          • #6
            N looks like the little keepers that help hold the W/S to the lower edge of C-cab doors.
            BINGO! thanks....

            M looks like a bumper washer.
            The hole is threaded and... and the surface has "tits" on it like the door striker shims ???? It was in a box of '63 Lark items

            I, to me, looks like a battery clamp bolt as is used on a Lark.
            I think so too... but needed someone to measure theirs as they came in different lengths.
            Thanks Biggy

            Ray




            Specializing in Studebaker Restoration
            Ray

            www.raylinrestoration.com
            Specializing in Studebaker Restoration

            Comment


            • #7
              N looks like the little keepers that help hold the W/S to the lower edge of C-cab doors.
              BINGO! thanks....

              M looks like a bumper washer.
              The hole is threaded and... and the surface has "tits" on it like the door striker shims ???? It was in a box of '63 Lark items

              I, to me, looks like a battery clamp bolt as is used on a Lark.
              I think so too... but needed someone to measure theirs as they came in different lengths.
              Thanks Biggy

              Ray




              Specializing in Studebaker Restoration
              Ray

              www.raylinrestoration.com
              Specializing in Studebaker Restoration

              Comment


              • #8
                Is S a coil bracket? Nothing ther to give some sense of scale.

                Terry

                Comment


                • #9
                  Is S a coil bracket? Nothing ther to give some sense of scale.

                  Terry

                  Comment


                  • #10
                    quote:Originally posted by dictator27

                    Is S a coil bracket? Nothing ther to give some sense of scale.

                    Terry
                    If you follow the link to the webpage... I have measurements and descriptions of what I "think" they might fit, but cannot verify, because the parts-books do not show an accurate picture, etc...

                    Ray


                    Specializing in Studebaker Restoration
                    Ray

                    www.raylinrestoration.com
                    Specializing in Studebaker Restoration

                    Comment


                    • #11
                      quote:Originally posted by dictator27

                      Is S a coil bracket? Nothing ther to give some sense of scale.

                      Terry
                      If you follow the link to the webpage... I have measurements and descriptions of what I "think" they might fit, but cannot verify, because the parts-books do not show an accurate picture, etc...

                      Ray


                      Specializing in Studebaker Restoration
                      Ray

                      www.raylinrestoration.com
                      Specializing in Studebaker Restoration

                      Comment


                      • #12
                        E looks like an emergency brake cable end. The one that connects to the cross barr off the handle side cable.

                        Comment


                        • #13
                          E looks like an emergency brake cable end. The one that connects to the cross barr off the handle side cable.

                          Comment


                          • #14
                            B shift linkages? Model?
                            I The hook end on the radio support rod isn't that long. I would think it is a battery hold down.
                            P looks like a throttle bellcrank but it doesn't match any car I've owned.
                            Q is a trunk latch, perhaps early C/K after 1952.

                            Brad Johnson
                            Pine Grove Mills, Pa.
                            '33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight
                            "All attempts to 'rise above the issue' are simply an excuse to avoid it profitably." --Dick Gregory

                            Brad Johnson, SDC since 1975, ASC since 1990
                            Pine Grove Mills, Pa.
                            sigpic'33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight "Désirée"

                            Comment


                            • #15
                              B shift linkages? Model?
                              I The hook end on the radio support rod isn't that long. I would think it is a battery hold down.
                              P looks like a throttle bellcrank but it doesn't match any car I've owned.
                              Q is a trunk latch, perhaps early C/K after 1952.

                              Brad Johnson
                              Pine Grove Mills, Pa.
                              '33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight
                              "All attempts to 'rise above the issue' are simply an excuse to avoid it profitably." --Dick Gregory

                              Brad Johnson, SDC since 1975, ASC since 1990
                              Pine Grove Mills, Pa.
                              sigpic'33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight "Désirée"

                              Comment

                              Working...
                              X