That is what I thought, so its time to fabricate. First draft in 1/4" plywood, then laser or water jet in stainless or aluminum.
Thanks
JK
Announcement
Collapse
No announcement yet.
Power Steering Photos Needed
Collapse
X
-
Basically they mounted the brackets off of studs to the water manifold mounting holes. Top of each branch, on the drivers side. I used a remote reservoir pump on a billet piece of aluminum and made my own bracket.
Leave a comment:
-
sometimes in Street rodder magazines , there's a guy /business that makes brackets , so if you fall short , there is a guy out there.
Leave a comment:
-
Power Steering Photos Needed
Gents,
On the "Racing Studebakers" venue I have a post about putting a SBC Weber cross ram manifold on the Stude. I have added an ATI SBC balancer to it with SBC pulleys. Now it is power steering time. I am going to use a 60s GM Saginaw pump. I need photos of any Studebaker V8 stock or non stock pump mount. I can not tell from my Stude manuals and photo archives what the pump is mounted off entirely. I do not expect to use a stock bracket but I would hope I can mount my brackets off the same points. Please advise.
JKTags: None
Leave a comment: