Announcement

Collapse
No announcement yet.

Rear Hub Puller

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rear Hub Puller

    We have just had a batch of rear hub pullers made using an original Kent-Moore Studebaker dealer tool as a template.

    Excellent quality and a bargain at only $125 Australian dollars.

    Chris
    STUDEBAKER of AUSTRALIA
    www.studeparts.com.au
    Click image for larger version

Name:	432.jpg
Views:	1
Size:	153.8 KB
ID:	1744657

  • #2
    That is a fine looking piece. cheers jimmijim
    sigpicAnything worth doing deserves your best shot. Do it right the first time. When you're done you will know it. { I'm just the guy who thinks he knows everything, my buddy is the guy who knows everything.} cheers jimmijim*****SDC***** member

    Comment


    • #3
      looks similar to the original Kent Moore puller
      Milt

      1947 Champion (owned since 1967)
      1961 Hawk 4-speed
      1967 Avanti
      1961 Lark 2 door
      1988 Avanti Convertible

      Member of SDC since 1973

      Comment


      • #4
        Milt -

        That IS what stude dude said he patterned them after...!

        Mike

        Comment


        • #5
          One thing that one needs is another set of holes for the trucks pattern.
          I have detailed plans for them if anyone has equipment to build one.
          sigpic

          Home of the Fried Green Tomato

          "IF YOU WANT THE SMILES YOU NEED TO DO THE MILES "

          1960 Champ , 1966 Daytona , 1965 Daytona Wagonaire

          Comment


          • #6
            The Studebaker hub puller that I remember used a metal wedge to impart a force.
            Gary L.
            Wappinger, NY

            SDC member since 1968
            Studebaker enthusiast much longer

            Comment


            • #7
              Originally posted by 2R5 View Post
              One thing that one needs is another set of holes for the trucks pattern.
              I have detailed plans for them if anyone has equipment to build one.
              Can you send them to me?
              I'll need one with four holes.

              Comment


              • #8
                Originally posted by Jefscoupe View Post
                Can you send them to me?
                I'll need one with four holes.

                I'll hunt them up and will have to scan them and send to you.....give me a few days , I'm busy the rest of the week.
                sigpic

                Home of the Fried Green Tomato

                "IF YOU WANT THE SMILES YOU NEED TO DO THE MILES "

                1960 Champ , 1966 Daytona , 1965 Daytona Wagonaire

                Comment


                • #9
                  The one that Chuck Collins (studebakerparts.com) sells has two different bolt patterns, 4 1/2" and 5".
                  Frank van Doorn
                  Omaha, Ne.
                  1962 GT Hawk 289 4 speed
                  1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
                  1952 V-8 232 Commander State "Starliner" hardtop OD

                  Comment


                  • #10
                    That's a fine looking puller. If my Googling is correct it's about $115.00 US dollars.

                    Comment


                    • #11
                      Originally posted by 53commander View Post
                      That's a fine looking puller. If my Googling is correct it's about $115.00 US dollars.
                      Yes, that sounds correct to me.

                      Chris.

                      Comment


                      • #12
                        I'd need to layout the different bolt patterns to be sure but maybe a combination of holes and slots so it will fit all of them.
                        A heavy washer over the slot should reinforce it enough.
                        What do we need?
                        4 on 4 and 5 on 4 1/2 are the only two I know of for Studebaker.

                        Comment


                        • #13
                          5 on 5 for pick ups
                          sigpic

                          Home of the Fried Green Tomato

                          "IF YOU WANT THE SMILES YOU NEED TO DO THE MILES "

                          1960 Champ , 1966 Daytona , 1965 Daytona Wagonaire

                          Comment


                          • #14
                            Originally posted by studegary View Post
                            The Studebaker hub puller that I remember used a metal wedge to impart a force.
                            Yep, the later Kent-Moore puller definitely was as you describe Gary, I have one that is used regularly.
                            Paul
                            Winston-Salem, NC
                            Visit The Studebaker Skytop Registry website at: www.studebakerskytop.com

                            Comment

                            Working...
                            X