Announcement

Collapse
No announcement yet.

Trip to Minnesota in Sept. can bring trailer.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trip to Minnesota in Sept. can bring trailer.

    As of right now I am planning a trip to Minnesota and Wisconsin in Sept. We had to cancel our trip the international meet in Dover this month for a number of reasons and that was a bummer so am going to plan on mixing together a couple of things in that area. I have a 55 th class reunion in St. Paul on the 17 th of Sept and figured I might as wall plan on taking in the Upper Mississippi Valley zone meet in Menomonie Wisconsin a week later.I will be driving and as always I like to bring my trailer along with large items for people that need them and can save the shipping, in the past I have delivered cars, frames, fenders, doors, hoods, trunks and can do the same on this trip.

    Right now I have on e-bay a 53 starliner with out an engine or trans and if someone were to win the auction I could and would bring it that way for a reduced shipping cost all other parts could be delivered for free if there was a car on the trailer if not then I would have to charge a fee but the more I sold the cheaper the fee for each, even a frame would travel for free if I had a car on the trailer, right now I have one 62 GT frame, one 63 Wagonair frame, one 66 -4 door frame, and a 56 power hawk frame. fenders, hoods, trunks doors ect. anyone interested let me know and we can see where this takes us.....Bob 510-266-2522
    Candbstudebakers
    Castro Valley,
    California



  • #2
    I will keep this in mind and let you know of what I might need. Regardless, I hope to see you then!
    sigpic
    In the middle of MinneSTUDEa.

    Comment


    • #3
      Plan on it Brent.
      Candbstudebakers
      Castro Valley,
      California


      Comment


      • #4
        I hope to go to the zone meet also.
        Dover was too far for me and too expensive.
        Maybe a lot of people will opt out of Dover and attend the great meet in Wisconsin.
        Robert Kapteyn

        Comment


        • #5
          Bob hope to see you at the zone meet. I should have my two hawk bodys and frames back here from Phenoix Az by then but if anything changes I'll let you know.

          Comment


          • #6
            Safe travels, Bob. I enjoyed my trip to Minnesota last time. Enjoy.
            Dave Warren (Perry Mason by day, Perry Como by night)

            Comment


            • #7
              Originally posted by warrlaw1 View Post
              Safe travels, Bob. I enjoyed my trip to Minnesota last time. Enjoy.
              Dave your always welcome here in the USA so maybe a little side trip to the zone meet would be something you could fit in...Bob
              Candbstudebakers
              Castro Valley,
              California


              Comment


              • #8
                Originally posted by rkapteyn View Post
                I hope to go to the zone meet also.
                Dover was too far for me and too expensive.
                Maybe a lot of people will opt out of Dover and attend the great meet in Wisconsin.
                Robert Kapteyn
                Bob hope to see you there, and it is always nice to see and visit with you, hope your feeling better....Bob
                Candbstudebakers
                Castro Valley,
                California


                Comment


                • #9
                  Originally posted by swvalcon View Post
                  Bob hope to see you at the zone meet. I should have my two hawk bodys and frames back here from Phenoix Az by then but if anything changes I'll let you know.
                  Steve your place is one I would like to visit when back there, Since I have more relatives left living in Minnesota I need to find a few things to do and see, see you then....Bob
                  Candbstudebakers
                  Castro Valley,
                  California


                  Comment


                  • #10
                    Always good to hear of cross country trips to Zone Meets! We'll see you there. I had my registration and hotel room all paid for months ago and am looking forward to it. Still deciding if I am going to drive the Avanti (lost a wiring harness on the way to the last UMVZ meet). That repair is all done now, but I may drive the truck with parts to sell instead.

                    Comment


                    • #11
                      bumping this up to try and keep it active, to late to put an ad in TW so this is the best way,....Bob
                      Candbstudebakers
                      Castro Valley,
                      California


                      Comment


                      • #12
                        So far as of today I looks like I will be delivering a 60 289 engine, bell housing, 3 speed with overdrive, and a rear end on my way to Minnesota in Sept, so more than likely will be bringing the trailer, sure would like to bring a car along, right now I have a 53 hardtop without an engine or trans but has a full GT dash, good glass, fair body, no side grille surrounds but rest of front clip is there, $1000.00 and $300.00 to deliver along my way there, come on some one find me a buyer and make my trip complete, also can still haul some other items....Bob
                        Candbstudebakers
                        Castro Valley,
                        California


                        Comment


                        • #13
                          Bob,
                          See you in Sept.

                          Comment


                          • #14
                            trying to keep this up near the top so I don't have do another one.
                            Candbstudebakers
                            Castro Valley,
                            California


                            Comment


                            • #15
                              Duane maybe we should discuss this as I also am thinking of taking parts to vent and my 66. Tom
                              sigpic

                              Comment

                              Working...
                              X