Announcement

Collapse
No announcement yet.

Champ inner fender

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DMB-8
    replied
    I am in need of an inner fender for the champ pickup or the 59 or 60 lark as I am now sure this will work.Thanks for all the input that I now feel that they will both work.If you have something in good shape I would sure like to have it.Call me at 724-651-9320.Thank You,Don

    Leave a comment:


  • Stude-Preferred
    replied
    Hi, I used an NOS Champ Fender & Apron that was factory jig welded on my 60 Lark. The only real difference was the 'rubber flap' that was stapled to the bottom of the apron. Studebaker used a much bigger one on the Champ. So I removed it. Otherwise no major metal difference, fit wise.

    Leave a comment:


  • Warren Webb
    replied
    The only difference I see between the two are the Lark fender has a plate to reinforce the horn mount while the Champ has a plate added to reinforce the inner battery hold down bolt. Neither apron has both. Starter solenoid & all other holes are the same. Both my fenders are original from a 60 Lark & a 62 Champ. Hope this helps.

    Leave a comment:


  • DMB-8
    replied
    My left( Drivers side) is the one I need the most.Any help would be appreciated.Thank You,Don

    Leave a comment:


  • Warren Webb
    replied
    Which side Don? I have samples here of both & can check tomorrow.

    Leave a comment:


  • DMB-8
    started a topic Champ inner fender

    Champ inner fender

    Will the 59-60 lark inner fender (apron) fit a 62 t cab the part #'s are different but the pictures look the same.
    Thank You,Don Borger
Working...
X