No announcement yet.

Chasing The devil....Rust

  • Filter
  • Time
  • Show
Clear All
new posts

  • Chasing The devil....Rust

    Click image for larger version

Name:	20131009_183537.jpg
Views:	1
Size:	115.1 KB
ID:	1741059Click image for larger version

Name:	20131014_104602.jpg
Views:	1
Size:	107.8 KB
ID:	1741060Click image for larger version

Name:	20131023_134053.jpg
Views:	1
Size:	119.4 KB
ID:	1741061Click image for larger version

Name:	20131104_125849 (1).jpg
Views:	1
Size:	89.2 KB
ID:	1741062Click image for larger version

Name:	20131105_155751.jpg
Views:	1
Size:	99.0 KB
ID:	1741063 Click image for larger version

Name:	20131105_171756.jpg
Views:	1
Size:	112.1 KB
ID:	1741064Never let it be said that them Studebakers can't hold their water..........Thank GOD for hard labor and POR15.

  • #2
    Nice job! I feel the same way about treating the inner panels with POR15 like you did. I also paint the edge of the bolt on panels with it too. That area under the fin is another place or anywhere that is not exposed to the sun & isn't topcoated.
    59 Lark wagon, now V-8, H.D. auto!
    60 Lark convertible V-8 auto
    61 Champ 1/2 ton 4 speed
    62 Champ 3/4 ton 5 speed o/drive
    62 Champ 3/4 ton auto
    62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
    63 G.T. Hawk R-2,4 speed
    63 Avanti (2) R-1 auto
    64 Zip Van
    66 Daytona Sport Sedan(327)V-8 4 speed
    66 Cruiser V-8 auto


    • #3
      What you did is a lot of work. But it is very worthwhile in the long run. Good luck with your project!
      1962 Champ

      51 Commander 4 door


      • #4
        Very nice work! That car will be better than new when done.
        Pat Dilling
        Olivehurst, CA
        Custom '53 Starlight aka STU COOL

        LS1 Engine Swap Journal: