Announcement

Collapse
No announcement yet.

Avanti style Super Charger Mounting bracket needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Studerick64
    replied
    That was our thought too, but still need to find one!

    Leave a comment:


  • SN-60
    replied
    To: Studerick64,----- If You can borrow/measure the factory Avanti side supercharger mount, don't rule out fabricating one out of 3/8" mild steel....it's been done before. (Aluminum even nicer if You can get Your hands
    on the less common TIG welder)

    Leave a comment:


  • Studerick64
    replied
    Thanks, but I just need the mounting bracket for the Avanti or the pattern for it.

    Leave a comment:


  • 63 R2 Hawk
    replied
    The airbox looks like it was cast, it's actually a pretty decent job especially if the linkage pass thru is "O" ringed or sealed somehow.

    Leave a comment:


  • SN-60
    replied
    Yep, that's what He's looking for....and how about that hand made airbox!!

    Leave a comment:


  • 63 R2 Hawk
    replied
    Don't know if this is the same as you are looking for:
    http://www.ebay.com/itm/studebaker-p...674d74&vxp=mtr
    You could always buy it and sell the Paxton.....

    Leave a comment:


  • Avanti style Super Charger Mounting bracket needed

    Avanti style Super Charger Mounting bracket needed.
    Our friends at Dutch Treat racing need these brackets for the El Mirage race car.
    http://www.dutchtreatracing.com/

    Call me if you have any
    Rick
    916-548-0340
Working...
X