Announcement

Collapse
No announcement yet.

Seat questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Seat questions

    Quick question folks, I just got a nice adjustable frame seat from Sasquatch, I am setting it up to mount it and I need to know if the original locating pins that stick out of the floor for the other type of seat I used to have need to be cut off for the new seat to fit and slide back and forth?
    Or, can I leave them, as a just in case thing?

    Second,
    There are 4 small holes already in the floor that seem to line up with the new seat frame, I don't want to assume that those are correct, but since the 2 seats were options, maybe they are?

    The 6 side mount bolts that bolt to the seat riser need to be drilled as far as I can tell, just want to verify. If those are the holes, does that position allow the seat to slide all the way back to the back wall?

    Thanks folks.

  • #2
    Nobody has switched a Fixed frame to a sliding frame?

    Comment


    • #3
      Kelly, check your emails and look for an attachment.

      Comment


      • #4
        Thanks Dwain. As always you have great info. This place never ceases to amaze me with the knowledge, documantation, and willingness to share it.

        Comment

        Working...
        X