Announcement

Collapse
No announcement yet.

63 Avanti Hood

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ken-renda
    replied
    Fortunately, the booster had not yet been sent to Myers so it and the hood were reinstalled, it looks like there is about an inch of clearenace between the booster and underside of hood which will have a full 1" insulator bonded to it. Still do not know is bonnet will fit. Ken, Deltaville Va

    Leave a comment:


  • JBOYLE
    replied
    To add to what Gunslinger said, note that the bulge blends into the instrument panel in front of the driver.
    I may be a bit slow, but I never noted that until I owned one. Neat feature, to the driver's eyes, it merges the inside and outside of the car.

    (That inside/outside effect is a bit like Loewy's famous inside/outside swimming pool at his Palm Springs home).

    Leave a comment:


  • Gunslinger
    replied
    Raymond Loewy insisted on the asymmetric hood bulge as he felt it naturally oriented the driver's eye correctly on the road. His earlier, private efforts with car designs during the late '50s showed a similar design cue.

    It had the added virtue of providing clearance for the brake booster and master cylinder since they sit somewhat high.

    Leave a comment:


  • DEEPNHOCK
    replied
    Asymmetrical styling.... All the rage at the time..

    Leave a comment:


  • ken-renda
    started a topic 63 Avanti Hood

    63 Avanti Hood

    The 63 Avanti hood has a "raised" portion immediately in front of the driver that tapers downward toward the front of the car. Is this raised portion for design or is it for underhood clearance? This is an R2, 4 speed, if that make any diference. Engine compatment is currently empty. Ken, Deltaville Va
Working...
X