Announcement

Collapse
No announcement yet.

Wagon rear quarter glass gaskets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by ST2DE5 View Post
    This seal does not fit a 2 door wagon right.
    That remains to be seen. Be sure to remember this- the four door wagons have a smaller rear quarter glass then the two doors do. So with that- I'd have to guess that if you ordered two or three of them, and had the nerve to cut them up (keeping in mind the window run on the 2 door) that they could be made to work.

    Winter is here, and since my Parkview is inside and my StudeBus is not--
    you can guess where my gasket priorities are right now...






    StudeDave '57
    StudeDave '57
    US Navy (retired)

    3rd Generation Stude owner/driver
    SDC Member since 1985

    past President
    Whatcom County Chapter SDC
    San Diego Chapter SDC

    past Vice President
    San Diego Chapter SDC
    North Florida Chapter SDC

    Comment


    • #17
      Thanks Dave. I will see what my glass man has come up with.

      Comment


      • #18
        Lookee here...anybody need these???

        http://www.ebay.com/itm/Studebaker-S...40912342998%26

        (not mine.)

        Maybe we should let Ed Reynolds buy these so he can reproduce them.
        Last edited by kurtruk; 02-03-2013, 02:35 PM. Reason: Second thought.
        KURTRUK
        (read it backwards)




        Nothing is politically right which is morally wrong. -A. Lincoln

        Comment


        • #19
          As a (now poorer)57 Packard Clipper wagon owner, I need these seals as well.
          I agree about the restoration cost of 57 Studebaker vs 57 Packard.
          Just paid my platers bill for the three bumpers and two enormous guards!
          sigpic1957 Packard Clipper Country Sedan

          "There's nothing stronger than the heart of a volunteer"
          Lt. Col. Jimmy Doolittle
          "I have a great memory for forgetting things" Number 1 son, Lee Chan

          Comment


          • #20
            My upholstery supplier has it in stock. It worked perfect.

            Comment


            • #21
              Originally posted by ST2DE5 View Post
              My upholstery supplier has it in stock. It worked perfect.
              Really now? Would you mind posting a few pics?
              StudeDave '57
              US Navy (retired)

              3rd Generation Stude owner/driver
              SDC Member since 1985

              past President
              Whatcom County Chapter SDC
              San Diego Chapter SDC

              past Vice President
              San Diego Chapter SDC
              North Florida Chapter SDC

              Comment


              • #22
                Originally posted by StudeDave57 View Post
                Really now? Would you mind posting a few pics?
                Yes Please do. And contact info.
                Pat Dilling
                Olivehurst, CA
                Custom '53 Starlight aka STU COOL


                LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611

                Comment


                • #23
                  Let me know how many feet you need. I will be over there later this week and I will send you some.

                  Originally posted by StudeDave57 View Post
                  Really now? Would you mind posting a few pics?

                  Comment


                  • #24
                    Originally posted by kurtruk View Post
                    Lookee here...anybody need these???

                    http://www.ebay.com/itm/Studebaker-S...40912342998%26

                    (not mine.)

                    Maybe we should let Ed Reynolds buy these so he can reproduce them.
                    These babies just sold for $406.00 plus 12 bucks shipping!!!!!
                    Glad I got mine a couple of years ago from a well known vendor at Reedsville for 20 bucks ea.
                    Way to go Milt!
                    Jim
                    I was STUDEBAKER, when STUDEBAKER wasn't "KOOL".

                    Comment


                    • #25
                      I was just on the phone yesterday with Valerie Hansen, daughter of William Fennessey. She is running the rubber side of their business, they advertise in the Business Card File of Turning Wheels. They have reproduced the gaskets for the rear side windows of the 2 door wagons. Same ones that just sold in the EBay auction. They sell for $60 a set. They also have a solution of the slide tracks for the sliding windows. I am about to make a order with her for all the rubber for my Conestoga. Give her a call, 615 356-7510.
                      Pat Dilling
                      Olivehurst, CA
                      Custom '53 Starlight aka STU COOL


                      LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611

                      Comment


                      • #26
                        Originally posted by Pat Dilling View Post
                        I was just on the phone yesterday with Valerie Hansen, daughter of William Fennessey. She is running the rubber side of their business, they advertise in the Business Card File of Turning Wheels. They have reproduced the gaskets for the rear side windows of the 2 door wagons. Same ones that just sold in the EBay auction. They sell for $60 a set. They also have a solution of the slide tracks for the sliding windows. I am about to make a order with her for all the rubber for my Conestoga. Give her a call, 615 356-7510.
                        For what years wagons are the Fennessey's gaskets?
                        KURTRUK
                        (read it backwards)




                        Nothing is politically right which is morally wrong. -A. Lincoln

                        Comment


                        • #27
                          Originally posted by kurtruk View Post
                          For what years wagons are the Fennessey's gaskets?
                          54-59 Two doors
                          Pat Dilling
                          Olivehurst, CA
                          Custom '53 Starlight aka STU COOL


                          LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611

                          Comment


                          • #28
                            Originally posted by Pat Dilling View Post
                            I was just on the phone yesterday with Valerie Hansen, daughter of William Fennessey. She is running the rubber side of their business, they advertise in the Business Card File of Turning Wheels. They have reproduced the gaskets for the rear side windows of the 2 door wagons. Same ones that just sold in the EBay auction. They sell for $60 a set. They also have a solution of the slide tracks for the sliding windows. I am about to make a order with her for all the rubber for my Conestoga. Give her a call, 615 356-7510.
                            That is good news! Thanks Pat.
                            JS
                            I was STUDEBAKER, when STUDEBAKER wasn't "KOOL".

                            Comment


                            • #29
                              Hi Pat,

                              Did you happen to find out if they have a solution for the vent window gaskets, also? The flat window Conestogas (54s and early 55s) have a unique vent seal, as well, and as far as I have been able to find out, there isn't anything available.

                              Great news on the rear seals. I'll be ordering some, as well as the seals for the rear sliders.

                              Thanks,

                              Scott

                              Comment


                              • #30
                                Originally posted by s2dwagon View Post
                                Hi Pat,

                                Did you happen to find out if they have a solution for the vent window gaskets, also? The flat window Conestogas (54s and early 55s) have a unique vent seal, as well, and as far as I have been able to find out, there isn't anything available.

                                Great news on the rear seals. I'll be ordering some, as well as the seals for the rear sliders.

                                Thanks,

                                Scott
                                Valerie said that her father has figured out that you can use C/K vent seals, but you need an extra set so you can cut them and graft a piece in since the wagon and sedan vents are taller than the C/K vents. This doubles the price since you need two sets of seals. She sells the vent seals for $65 per set. He can give advice on where to make the cut.
                                Pat Dilling
                                Olivehurst, CA
                                Custom '53 Starlight aka STU COOL


                                LS1 Engine Swap Journal: http://www.hotrodders.com/forum/jour...ournalid=33611

                                Comment

                                Working...
                                X