Announcement

Collapse
No announcement yet.

55 speedster- rear hubs and drums

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TX Rebel
    replied
    drums available

    1/16 = .0625

    I have good drums in stock

    Leave a comment:


  • Carl Purdy
    replied
    Since when is .060 a 1/16. That wasn't the teachin I got.

    Leave a comment:


  • PackardV8
    replied
    how far can one turn the drums to get rid of rust pits.
    After you get down to .060", a few rust pits remaining won't hurt a thing as long as most of the surface is clean.

    jack vines

    Leave a comment:


  • Tom Bredehoft
    replied
    Normally drums can be turned .060 (1/16) oversize.

    Leave a comment:


  • forrest
    started a topic 55 speedster- rear hubs and drums

    55 speedster- rear hubs and drums

    does anyone out there know where I can buy a couple of rear brake drums and hubs new if possible.
    If they are not available how far can one turn the drums to get rid of rust pits.
Working...
X