Announcement

Collapse
No announcement yet.

Camshaft help!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Brian,

    I sent the cam & lifters out of my 259 to Oregon Cam this past February. They charged me $50 for the cam and $64 for the 16 lifters. They had to take a little over .0005 off each of the larger lobes and .00125 off the smaller #5 back bearing surface to clean them up. With standard cam bearings that threw the clearance on the back one up near the .00275 maximum per the shop manual and # 4 just barely over at .0028. It cost $19 each way from Tulsa & back for UPS. I am very pleased with how the grinding of the cam and resurfacing of the lifters turned out.

    Charlie D.

    Comment

    Working...
    X