Announcement

Collapse
No announcement yet.

Engine and transmission needed for 62 GT Hawk

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine and transmission needed for 62 GT Hawk

    I picked up a project 62 GT Hawk and need an engine and transmission. Would prefer an R1 with 4 speed. Any help in locating one would be greatly appreciated.

  • #2
    a little saturday "bump"...
    Kerry. SDC Member #A012596W. ENCSDC member.

    '51 Champion Business Coupe - (Tom's Car). Purchased 11/2012.

    '40 Champion. sold 10/11. '63 Avanti R-1384. sold 12/10.

    Comment


    • #3
      I have the transmission and bellhousing, but still looking for an engine.

      Comment


      • #4
        Since an R-1 would not be stock for a 62 anyway you would probably have better luck buying a standard 289 and doing some upgrades. An R-1 will be harder to find, but you never know when one might come up for sale.
        sigpic

        "In the heart of Arkansas."
        Searcy, Arkansas
        1952 Commander 2 door. Really fine 259.
        1952 2R pickup

        Comment


        • #5
          Originally posted by 52-fan View Post
          Since an R-1 would not be stock for a 62 anyway you would probably have better luck buying a standard 289 and doing some upgrades. An R-1 will be harder to find, but you never know when one might come up for sale.
          I would definately consider doing exactly that, would also travel a bit to get it, if anyone has a deccent 289 within 300 miles of Warrenton, VA please let me know.

          Comment


          • #6
            I have a very good 63' Cruiser 289 with OD and all new clutch if you could go that way instead of 4sp....

            Comment


            • #7
              jackb - PM sent

              Comment


              • #8
                Check your pm

                Comment


                • #9
                  i have a complete restored rolling 1962 chassis with the stock driveline you are looking for.

                  Comment


                  • #10
                    Originally posted by ed j ellis View Post
                    i have a complete restored rolling 1962 chassis with the stock driveline you are looking for.
                    PM sent - thank you

                    Comment

                    Working...
                    X