Announcement

Collapse
No announcement yet.

SE Zone Meet Tifton March 19.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SE Zone Meet Tifton March 19.

    Who all is gonna make it? I will be there Saturday and will bring a few parts to sell.

    Parts include the hood, grilles, and grille assembly for a 53-54 C/K; Stewart Warner 2 5/8 in gauges (water temp, 2 fuel pressure, oil temp, oil pressure, amperage, fuel level) with a 3 3/8 Stewart Warner speedo, and some original Hawk gauges; an NOS 54 gauge cluster and rough 53 gauge cluster; and maybe some other misc parts.

    I also have many other Stude parts (Lark dogdishes, a Hawk lower valance, and a complete 53-54 dash) and so if you are in need of something of a C/K feel free to p.m. me. I also have a selection of Big Block MoPar parts.
    Alex Nelsen, certified Studebaker nut.
    Driving a 1954 Champion Coupe powered by a Chrysler 383.
    Lizella, GA

  • #2
    Bring that Hawk lower valance...and those '53 grille pieces....
    Jeff
    HTIH (Hope The Info Helps)

    Jeff


    Get your facts first, and then you can distort them as much as you please. Mark Twain



    Note: SDC# 070190 (and earlier...)

    Comment


    • #3
      I'll be there with a pile of polished stainless trim to flaunt.. And a '51 coupe.

      Comment


      • #4
        I'll be there, but Ugly Betty couldn't come. She's been a bad girl!!
        Jamie McLeod
        Hope Mills, NC

        1963 Lark "Ugly Betty"
        1958 Commander "Christine"
        1964 Wagonaire "Louise"
        1955 Commander Sedan
        1964 Champ
        1960 Lark

        Comment


        • #5
          I'm gonna be there, prolly exhausted, but there! Rene has some upholstery for me to pick up.
          P.S. updated a few pics on my blog.
          Bez Auto Alchemy
          573-318-8948
          http://bezautoalchemy.com


          "Don't believe every internet quote" Abe Lincoln

          Comment


          • #6
            Brad... Will you do me a favor, and bring one of those Avanti wire wheel covers I restored? That would look great on my table-o-stainless.. I'll buy you lunch if you do!

            Comment


            • #7
              Originally posted by mbstude View Post
              Brad... Will you do me a favor, and bring one of those Avanti wire wheel covers I restored? That would look great on my table-o-stainless.. I'll buy you lunch if you do!
              Coitenly....nyuk.....nyuk.....nyuk!
              Bez Auto Alchemy
              573-318-8948
              http://bezautoalchemy.com


              "Don't believe every internet quote" Abe Lincoln

              Comment


              • #8
                Looking forward to seeing you Alex. I missed you last year at Braselton.
                Neil Thornton

                Comment


                • #9
                  I will be there on friday afternoon,sorry no Avanti its apart again,i talked to a few other North Ga SDC members
                  that will also be there.

                  Comment


                  • #10
                    Forgot to mention. that I'll only be there Saturday....gotta works tomorrow, getting the R1 soda blasted.
                    Bez Auto Alchemy
                    573-318-8948
                    http://bezautoalchemy.com


                    "Don't believe every internet quote" Abe Lincoln

                    Comment


                    • #11
                      I got here last night. Already a few Studebakers in the parking lot. (Not mine however )
                      Joe Roberts
                      '61 R1 Champ
                      '65 Cruiser
                      Eastern North Carolina Chapter

                      Comment


                      • #12
                        If you see Bama Jak remind him to pass the word that on NDYSD we will be haviving a parade at Tri Sate Meet. David PS got part

                        Comment


                        • #13
                          I made it. The '51 made it. And a ton of other people and cars made it! I got a good look at Jeff Rice's new '53 drag car.. Man, what a cool set of wheels.. It's gonna be a good weekend.

                          Comment


                          • #14
                            Matthew already helped me with a 'Trim Trader' trim piece!
                            (Dale McPherson will be proud!)
                            Jeff



                            Click image for larger version

Name:	SDC SE Zone Meet March 19 20 2011 034.jpg
Views:	1
Size:	97.4 KB
ID:	1667675

                            Originally posted by mbstude View Post
                            I made it. The '51 made it. And a ton of other people and cars made it! I got a good look at Jeff Rice's new '53 drag car.. Man, what a cool set of wheels.. It's gonna be a good weekend.
                            HTIH (Hope The Info Helps)

                            Jeff


                            Get your facts first, and then you can distort them as much as you please. Mark Twain



                            Note: SDC# 070190 (and earlier...)

                            Comment


                            • #15
                              Superb Studebaker day!
                              (Pic's are uploading now...)
                              Worst part of the day was the pollen.
                              Black car...Cleaned at 11am.
                              Covered with pine tree pollen at 11:10am
                              Jeff
                              HTIH (Hope The Info Helps)

                              Jeff


                              Get your facts first, and then you can distort them as much as you please. Mark Twain



                              Note: SDC# 070190 (and earlier...)

                              Comment

                              Working...
                              X