Announcement

Collapse
No announcement yet.

Dyno fun

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dyno fun

    After a few teething problems, got the R3 dyno tuned and ready for fun.
    Had an R1 carb which after rejetted, managed a respectable 370 hp.
    Decided on a new Edelbrock AVS, on which I modified the floats to acept boost.
    Did one pull normally aspirated and found the baseline.....one step richer needed on primarys.
    Ready for blower pressure now.
    Drum roll please....................
    394.8 hp @ 5600 rpm
    396.2 ft lbs @ 4600 rpm
    93 octane PUMP GAS !!!

    I bet 400 is lurking around the corner with racing fuel and timing adjustments.
    Bez Auto Alchemy
    573-318-8948
    http://bezautoalchemy.com


    "Don't believe every internet quote" Abe Lincoln

  • #2
    Sweet!
    I know your teething problems were bugging you...
    Glad to see you are on the right path!
    (Post this over on Sonny's site, too..OK?)
    Jeff
    HTIH (Hope The Info Helps)

    Jeff


    Get your facts first, and then you can distort them as much as you please. Mark Twain



    Note: SDC# 070190 (and earlier...)

    Comment


    • #3
      Nimesh the "Majic Dentist" got it straightened out. He went beyond the call of duty to repair a valve issue on his own time and nickle. Can't say enough good about him and his work ethic.
      Bez Auto Alchemy
      573-318-8948
      http://bezautoalchemy.com


      "Don't believe every internet quote" Abe Lincoln

      Comment


      • #4
        R3 power

        Originally posted by bezhawk View Post
        Nimesh the "Majic Dentist" got it straightened out. He went beyond the call of duty to repair a valve issue on his own time and nickle. Can't say enough good about him and his work ethic.
        CONGRATULATIONS, I like the "on pump gas" part the best, with Nimesh helping, 400HP should be easy

        Comment


        • #5
          Excellent. What is it going to power...or what is it already powering? BP
          We've got to quit saying, "How stupid can you be?" Too many people are taking it as a challenge.

          Ayn Rand:
          "You can avoid reality, but you cannot avoid the consequences of avoiding reality."

          G. K. Chesterton: This triangle of truisms, of father, mother, and child, cannot be destroyed; it can only destroy those civilizations which disregard it.

          Comment


          • #6
            Originally posted by BobPalma View Post
            Excellent. What is it going to power...or what is it already powering? BP
            It is going into Avanti R-5590 That I'm restoring. A true B series block R3 installed in this car very early in it's life.
            Bez Auto Alchemy
            573-318-8948
            http://bezautoalchemy.com


            "Don't believe every internet quote" Abe Lincoln

            Comment


            • #7
              I'd love to see the pull with rpm/O2/boost/torque graphed. Could be a good baseline for the AFB vs AVS.
              Jim
              Often in error, never in doubt
              http://rabidsnailracing.blogspot.com/

              ____1966 Avanti II RQA 0088_______________1963 Avanti R2 63R3152____________http://rabidsnailracing.blogspot.com/

              Comment

              Working...
              X