No announcement yet.

Part needed for a 62 Hawk

  • Filter
  • Time
  • Show
Clear All
new posts

  • Part needed for a 62 Hawk

    I am restoring a 62 Hawk. Adding power brakes. I currently have every part that I need except one. On this car, the vacuum booster has two metal fittings' one on the inlet and one on the outlet that look like a banjo. They are held on by a special bolt. I have one bolt but am missing the other. The number of the bolt that is missing is 1899696 but I would take either bolt because the other could be modified to work just fine since they both go on the same.
    I would very much appreciate any help that I receive on this. You can contact me on this forum or at my e-mail. Thanks in advance for your help. Pat Emmert.

  • #2
    Pat, post a picture as numbers suck.
    Castro Valley,


    • #3
      Banjo bolts are still available at most auto parts stores. Take your other one for a sample.
      Frank van Doorn
      Omaha, Ne.
      1962 GT Hawk 289 4 speed
      1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
      1952 V-8 232 Commander State "Starliner" hardtop OD


      • #4
        Frank, I have not found any auto patrs stores in the Sacramento area that had anything that resembles this bolt. I have also contates Studebaker West, Studebaker International and several Bay area Studebaker parts people and have had no luck. This is a very different bolt than standard. Thanks fo your suggestion. Pat.


        • #5
          I have found the part. Thanks!!