Announcement

Collapse
No announcement yet.

Need Champion window seal rubber

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need Champion window seal rubber

    Does anybody have any '40 Champion window seal rubber, mainly the rear? I need a new one, as the old one just isn't there.[B)] I can take out the rear window just by picking it up and taking it out! I also need the front, it is not nearly as bad, it still holds out water, but is pretty dry rotted. I need to rear seal as my back seat is getting water stains.[B)] Thanks in advance!

    Chris Dresbach

    1940 Champion two door.
    Parts of the 1952 Model N
    1960s Prototype cart
    Chris Dresbach

  • #2
    You may want to try Bill Fennessey.
    William Fennessey 217 Andover Lane Nashville Tn.37221 (615) 662-5013


    Larry Y
    North Wales, PA
    Larry Y
    North Wales, PA

    Comment


    • #3
      Chris,
      Yours must have the reveal molding; SI lists the rubber molding (without reveal); front and rear.
      You're familiar with SI?...right?[)]
      "All attempts to 'rise above the issue' are simply an excuse to avoid it profitably." --Dick Gregory

      Brad Johnson, SDC since 1975, ASC since 1990
      Pine Grove Mills, Pa.
      '33 Rockne 10,
      '51 Commander Starlight,
      '53 Commander Starlight "Désirée",
      '56 Sky Hawk

      Comment


      • #4
        quote:Originally posted by rockne10

        Chris,
        Yours must have the reveal molding; SI lists the rubber molding (without reveal); front and rear.
        You're familiar with SI?...right?[)]
        Ah, just found it. Didn't know Ed had a lot of pre war stuff, as most of the stuff at plant 3 & 4 is mostly "modern era," as I didn't find the ancient stuff at sasco, but I wasn't really looking at the time either.[)][][?]

        Chris Dresbach

        1940 Champion two door.
        Parts of the 1952 Model N
        1960s Prototype cart
        Chris Dresbach

        Comment

        Working...
        X