Announcement

Collapse
No announcement yet.

Looking for rear axle parts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DEEPNHOCK
    replied
    You might try a 4wd shop.
    Lot's of Dana44 diff's out there in Jeeps and Blazers.
    A good one should have a lot of 'outside the norm' parts.

    Leave a comment:


  • 00RACER
    replied
    Yes, Studerich-I do realize that but you do run into circumstances where guys have taken some things apart and have these parts
    THANKS
    PAUL

    Leave a comment:


  • StudeRich
    replied
    TT Carriers are NSS, "not sold separately" Paul.

    StudeRich

    Leave a comment:


  • 00RACER
    replied
    YES, THE ONE CARRIER IS FROM 3.07 THRU 3.73 AND THE OTHER CARRIER IS FOR 3.90 AND LOWER GEARS(I.E. HIGHER NUMERICAL GEARS)
    PAUL LAUSCH

    Leave a comment:


  • buddymander
    replied
    I have a complete 1957 3.90 TT that I'm going to ebay soon and am wondering; does the 3.90 and lower ring gear take a different carrier that the higher ratios, like 3.54?

    Leave a comment:


  • 00RACER
    started a topic Looking for rear axle parts

    Looking for rear axle parts

    The items I need are for the 44 axle housing.I need 1560657-19 spline standard axle-case assembly-TT-for 3.90-4.89 or lower gears-or just the case without the guts.
    ---or---1560446 same as above except for flanged axles with finer spline- and again the assembly or the case without the guts
    THANKS
    PAUL LAUSCH
Working...
X