Announcement

Collapse
No announcement yet.

Part Number

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Part Number

    Have a question Packard friend asked me if I could find what a 3070981 was it not in My 57 Studebaker Packard parts book any help greatly appreciated

  • #2
    I don't think that is a valid part#. There's too many digits...

    307098W- Ornament Ring- Front Fender. W5-Y, 5H ('54 Commander)

    That's the small chrome ring that goes around the lazy-S on the front fender of a '54 Commander Sedan.



    Ray


    Specializing in Studebaker Restoration
    Ray

    www.raylinrestoration.com
    Specializing in Studebaker Restoration

    Comment


    • #3
      quote:Originally posted by Studeman

      I don't think that is a valid part#. There's too many digits...

      307098W- Ornament Ring- Front Fender. W5-Y, 5H ('54 Commander)

      That's the small chrome ring that goes around the lazy-S on the front fender of a '54 Commander Sedan.
      Ray
      That would be a Ring for the lazy V-8, Ray! [:0]
      Unless it were the 097W Ring for a Champion!

      It was only used on Regals and Land Cruisers.

      That's a good guess, probably the only Stude. number close to that wrong number.


      StudeRich at Studebakers Northwest -Ferndale,WA
      StudeRich
      Second Generation Stude Driver,
      Proud '54 Starliner Owner

      Comment


      • #4
        [quote]quote:Originally posted by StudeRich

        Originally posted by Studeman


        That would be a Ring for the lazy V-8, Ray! [:0]

        That's a good guess, probably the only Stude. number close to that wrong number.
        I was just going by the parts-book drawing.. I wasn't asked to look up the number for the S or V8...
        are you surprised I made the "mistake" or that you caught it?



        Ray


        Specializing in Studebaker Restoration
        Ray

        www.raylinrestoration.com
        Specializing in Studebaker Restoration

        Comment


        • #5
          Can your friend give a description of the part in question, almost seems like it could be the part manufacture's in holse number like Ray says it too many digits to be Stude. I'll add my two cents DO NOT call a Packard parts vendor about this if it may be a Studebaker part! One vendor told me at Hershey "Thats a F$^&*#%@ Studebaker part" after I asked him is this a Parkard moulding? (showing him a NOS moulding in a Packard bag)

          Jon Krimm
          1962 Lark Sedan

          1961 Champ

          Comment


          • #6
            quote:Originally posted by 62SY4

            DO NOT call a Packard parts vendor about this if it may be a Studebaker part! One vendor told me at Hershey "Thats a F$^&*#%@ Studebaker part" after I asked him is this a Parkard moulding? (showing him a NOS moulding in a Packard bag) Jon Krimm
            Some of those 'Packard' guys have no love for the ones not made in Detroit. [:0]

            In related news~ my PAC Membership runs out this month...





            StudeDave '57 [8D]
            San Diego, Ca.
            (but not for long...)


            '54 Commander Regal 4dr 'Ruby'
            '57 Parkview 'Betsy' (she's a 2dr wagon)
            '57 Commander DeLuxe 2dr 'Baby'
            '57 Champion Custom 2dr 'Jewel'
            '58 Packard sedan 'Cleo'
            '65 Cruiser 'Sweet Pea'
            StudeDave '57
            US Navy (retired)

            3rd Generation Stude owner/driver
            SDC Member since 1985

            past President
            Whatcom County Chapter SDC
            San Diego Chapter SDC

            past Vice President
            San Diego Chapter SDC
            North Florida Chapter SDC

            Comment


            • #7
              My friend looked again and said there was a mark on the number and it is a W thanks for all the help. Just want to say that not all Packard people are unfriendly or will not associate with we Packardbaker people you just need to find the better grade of Packard people.

              Comment


              • #8
                I understand I have a 46 Clipper that is a 'when I get a chance', I put some more patches in it. I have sevral friends that are way into Packards, it was just that one snobby vendor who shall remain nameless.

                Jon Krimm
                1962 Lark Sedan

                1961 Champ

                Comment

                Working...
                X