Announcement

Collapse
No announcement yet.

R2 Avanti engine dimension needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 63r2
    replied
    M5 chassis might be similar to the Champ chassis in which case you could use the Champ V8 mounts.
    pb

    Leave a comment:


  • 63r2
    replied
    From the middle of the mount to the middle of the mount it is approx 18 inches

    Leave a comment:


  • navyguy07
    replied
    63r2 (or others),

    Could you measure the lateral distance between the front motor mounts? Trying to fit an R2 in an M5 frame.... thanks for the help!

    Leave a comment:


  • 63r2
    replied
    Sal
    Let me know when you decide.
    pb

    Leave a comment:


  • sals54
    replied
    Thank you for the measurement. That sounds perfect. Close, but perfect. As to the horn button, no. I do have an Avanti wheel but have not decided to use it or switch to the Nardi wheel.

    Leave a comment:


  • 63r2
    replied
    Sal
    The motor is sitting in the chassis, it measures approx 30 inches from the sump to the top of the air box.
    pb
    ps did I ask if you had a horn button holder for the Avanti steering wheel ?
    pb

    Leave a comment:


  • 63r2
    replied
    Uncle Sal,
    Would to the top of a R3 air box do as a measurement ?
    pb

    Leave a comment:


  • sals54
    started a topic R2 Avanti engine dimension needed

    R2 Avanti engine dimension needed

    I'm wondering if anyone has an Avanti R2 engine out of the car and could measure the dimension from bottom of pan to top of carb bonnet.
    Thanks in advance for any info.
Working...
X