Announcement

Collapse
No announcement yet.

European Studebaker Meeting 2019

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • European Studebaker Meeting 2019

    There is a Studebaker and Packard Meeting in the Netherlands from 15th to 19th May 2019.
    http://www.spcn.nl/invitation-euromeet-2019/

    I just signed up for it.
    Is there anyone else from the SDC Forum on this Meeting?

    Martin

  • #2
    Strange that this hasn't been brought up here before, it's been known for a while & myself hasn't had the thought in my head any of the times I've been here, shame on me.
    Anyway; if I can - I sure will but my connections with Holland are getting slimmer now since we're selling the tug we have at the moment outside Groningen. Still: I sure hope so!
    Lived there (Not Groningen thou.) for 18 years...
    Last edited by Noxnabaker; 05-13-2019, 01:03 PM.
    sigpic

    Josephine
    -55
    Champion V8
    4d sedan

    Comment


    • #3
      I've been to two of their events.....all well done.....I'd love to go again....just don't want to sit on that airplane for 10 hours....yuk!
      Lou Van Anne
      62 Champ
      64 R2 GT Hawk
      79 Avanti II

      Comment


      • #4
        Two days until start of the meeting and the repair of my President is still in progress
        Yesterday I replace the torque converter and the transmission.
        Click image for larger version

Name:	IMG_20190512_114010.jpg
Views:	1
Size:	103.5 KB
ID:	1728034 Click image for larger version

Name:	IMG_20190512_114027.jpg
Views:	1
Size:	64.1 KB
ID:	1728035 Click image for larger version

Name:	IMG_20190512_141156.jpg
Views:	1
Size:	82.7 KB
ID:	1728036 Click image for larger version

Name:	IMG_20190512_161936.jpg
Views:	1
Size:	98.5 KB
ID:	1728037

        Today I have to replace the door seals and reinstall the doors
        Click image for larger version

Name:	IMG_20190509_172032.jpg
Views:	1
Size:	77.7 KB
ID:	1728038

        Tomorrow I will do a test drive by car and I have to polish it.
        Lots of work and little time, I hope all repairs I have done work well (fingers crossed)
        Attached Files

        Comment


        • #5
          That's a TIGHT deadline, but it sounds like you might make it. Good Luck, and enjoy the show!

          Comment

          Working...
          X