Announcement

Collapse
No announcement yet.

What Year is this Champ Pickup?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What Year is this Champ Pickup?

    Someone in Illinois saw this Champ in the junkyard the other day. It looks like it might be worth restoring, if the bottom rust isn't too bad.
    I'm just wondering what grill is in it, and what year the Champ is? Thanks, Tom

    Click image for larger version

Name:	Champ 1.jpg
Views:	1
Size:	119.9 KB
ID:	1757777 Click image for larger version

Name:	Champ 2.jpg
Views:	1
Size:	176.2 KB
ID:	1757778 Click image for larger version

Name:	Champ 3.jpg
Views:	1
Size:	173.2 KB
ID:	1757779

  • #2
    The truck was built between 1960 and 1962. The 1963 and 64's have hanging brake and clutch pedals. The grill has to be from a 1959 to 61 Lark. Bud

    Comment


    • #3
      The 1960 models had three indentations above the rear window, which this one lacks. The trim on the right front fender is not the funky 1961 "kick up" style, so along with Bud's spot-on analysis, I'd say it's a 1962 7E.
      Mike Davis
      Regional Manager, North Carolina
      1964 Champ 8E7-122 "Stuey"

      Comment


      • #4
        field truck or lawn ornament only..... unless you've got 2-3 parts' trucks out back...

        Comment


        • #5
          Looks to be a 7E5-122, 3 sp/OD. VIN should fall between 132601 and 135600. As Jack mentioned, might be good for just ornamental purposes. Floors would be the determining factor. If it can be picked, factory rear bumper (and its brackets), should be saved. If the padded dash does not have any holes or cracks, it has value as well.

          Comment


          • #6
            Yes, the wide bed and lack of the 'kicked up' moldings, along with the non-suspended pedals inside, indicate a '62, the highest-sale year for Champ.
            Bill Pressler
            Kent, OH
            (formerly Greenville, PA)
            Currently owned: 1966 Cruiser, Timberline Turquoise, 26K miles
            Formerly owned: 1963 Lark Daytona Skytop R1, Ermine White
            1964 Daytona Hardtop, Strato Blue
            1966 Daytona Sports Sedan, Niagara Blue Mist
            All are in Australia now

            Comment


            • #7
              That has to be the FIRST for a backwards Grille swap!

              You see a few '59-'60 Larks with Champ Grilles installed, but I have never seen a Champ with a '59 Lark Regal Grille before.

              The '59 and '60 Grilles Both fit with or without the Regal Surround Moulding, but a '61 is a No Fit, being narrower and Longer.



              A '59 Lark Grille and Regal Moulding with a '59 Lark (Hawk) Ornament in the '60 Location, on a '62 Champ Truck.
              Last edited by StudeRich; 04-29-2018, 03:14 PM.
              StudeRich
              Second Generation Stude Driver,
              Proud '54 Starliner Owner

              Comment


              • #8
                The grille texture looks like a 59 Grille. I see what looks like the accessory oil pressure & amp gauges in the area usually found for the radio. If those are what they appear to be grab 'em
                59 Lark wagon, now V-8, H.D. auto!
                60 Lark convertible V-8 auto
                61 Champ 1/2 ton 4 speed
                62 Champ 3/4 ton 5 speed o/drive
                62 Champ 3/4 ton auto
                62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
                63 G.T. Hawk R-2,4 speed
                63 Avanti (2) R-1 auto
                64 Zip Van
                66 Daytona Sport Sedan(327)V-8 4 speed
                66 Cruiser V-8 auto

                Comment


                • #9
                  Grill

                  I would like to put a Lark grill on my 62 Champ if it would fit

                  Comment


                  • #10
                    Originally posted by WLB View Post
                    I would like to put a Lark grill on my 62 Champ if it would fit
                    '59 and '60 model Lark grills will fit without any modifications - bolt on change - good luck.
                    Last edited by 62champ; 04-30-2018, 08:37 PM.

                    Comment


                    • #11
                      In my opinion, it is only worth scrap metal price.
                      sigpic
                      In the middle of MinneSTUDEa.

                      Comment


                      • #12
                        When they return - ask if they could take a photo of the VIN plate so it can be added to the 7E registry. Thanks.

                        Comment

                        Working...
                        X