Announcement

Collapse
No announcement yet.

1948 Champion Rocker Moulding Install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1948 Champion Rocker Moulding Install

    I had to replace the rockers on a 1948 Champion. They were rusted off. However, when the new ones arrived they did have the holes for the rocker clips. I didn't have a good enough piece left to see exactly what they looked like. Does anyone have pictures of the rockers with the holes in them so I can see how I need to cut mine for the clips.

  • #2
    Anyone have pictures of the rockers with holes?

    Comment


    • #3
      If they are the same as the '50-'52 the holes would be rectangular; assuming the original type clips are to be used. I would photo mine but they are concealed by moulding.
      "All attempts to 'rise above the issue' are simply an excuse to avoid it profitably." --Dick Gregory

      Brad Johnson, SDC since 1975, ASC since 1990
      Pine Grove Mills, Pa.
      sigpic'33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight "Désirée"

      Comment

      Working...
      X