Announcement

Collapse
No announcement yet.

Power Steering Photos Needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Power Steering Photos Needed

    Gents,

    On the "Racing Studebakers" venue I have a post about putting a SBC Weber cross ram manifold on the Stude. I have added an ATI SBC balancer to it with SBC pulleys. Now it is power steering time. I am going to use a 60s GM Saginaw pump. I need photos of any Studebaker V8 stock or non stock pump mount. I can not tell from my Stude manuals and photo archives what the pump is mounted off entirely. I do not expect to use a stock bracket but I would hope I can mount my brackets off the same points. Please advise.

    JK

  • #2
    sometimes in Street rodder magazines , there's a guy /business that makes brackets , so if you fall short , there is a guy out there.

    Comment


    • #3
      What year is your Stude and what engine?

      Comment


      • #4
        Basically they mounted the brackets off of studs to the water manifold mounting holes. Top of each branch, on the drivers side. I used a remote reservoir pump on a billet piece of aluminum and made my own bracket.
        Bez Auto Alchemy
        573-318-8948
        http://bezautoalchemy.com


        "Don't believe every internet quote" Abe Lincoln

        Comment


        • #5
          That is what I thought, so its time to fabricate. First draft in 1/4" plywood, then laser or water jet in stainless or aluminum.

          Thanks

          JK

          Comment

          Working...
          X