Announcement

Collapse
No announcement yet.

Champ inner fender

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Champ inner fender

    Will the 59-60 lark inner fender (apron) fit a 62 t cab the part #'s are different but the pictures look the same.
    Thank You,Don Borger

  • #2
    Which side Don? I have samples here of both & can check tomorrow.
    59 Lark wagon, now V-8, H.D. auto!
    60 Lark convertible V-8 auto
    61 Champ 1/2 ton 4 speed
    62 Champ 3/4 ton 5 speed o/drive
    62 Champ 3/4 ton auto
    62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
    63 G.T. Hawk R-2,4 speed
    63 Avanti (2) R-1 auto
    64 Zip Van
    66 Daytona Sport Sedan(327)V-8 4 speed
    66 Cruiser V-8 auto

    Comment


    • #3
      My left( Drivers side) is the one I need the most.Any help would be appreciated.Thank You,Don

      Comment


      • #4
        The only difference I see between the two are the Lark fender has a plate to reinforce the horn mount while the Champ has a plate added to reinforce the inner battery hold down bolt. Neither apron has both. Starter solenoid & all other holes are the same. Both my fenders are original from a 60 Lark & a 62 Champ. Hope this helps.
        59 Lark wagon, now V-8, H.D. auto!
        60 Lark convertible V-8 auto
        61 Champ 1/2 ton 4 speed
        62 Champ 3/4 ton 5 speed o/drive
        62 Champ 3/4 ton auto
        62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
        63 G.T. Hawk R-2,4 speed
        63 Avanti (2) R-1 auto
        64 Zip Van
        66 Daytona Sport Sedan(327)V-8 4 speed
        66 Cruiser V-8 auto

        Comment


        • #5
          Hi, I used an NOS Champ Fender & Apron that was factory jig welded on my 60 Lark. The only real difference was the 'rubber flap' that was stapled to the bottom of the apron. Studebaker used a much bigger one on the Champ. So I removed it. Otherwise no major metal difference, fit wise.

          Comment


          • #6
            I am in need of an inner fender for the champ pickup or the 59 or 60 lark as I am now sure this will work.Thanks for all the input that I now feel that they will both work.If you have something in good shape I would sure like to have it.Call me at 724-651-9320.Thank You,Don

            Comment

            Working...
            X