PDA

View Full Version : 51 Land cruiser wheel covers



larkregal62
12-08-2013, 05:08 PM
Any one out there have at least two full wheel covers for a 51 Landcruiser?? They don't have to be New or perfect, but I would like very presentable items. Put radial tires on and lost one due to "flex" Hope I learned a lesson--- also open to suggestions on how to run them without losing them Thanks in advance for the responses

rockne10
12-08-2013, 07:55 PM
The reproductions offered by Richard Quinn and SI are high quality and seem to hang on well.

52 Ragtop
12-08-2013, 09:11 PM
I think I still have one, I'll look tomorrow

Jim

StudeRich
12-08-2013, 09:11 PM
You can bend the Mounting clips on the back of the Wheel Covers a little outward to tighten them, try one at 12, 3, 6 and 9:00 O-Clock first.
Stronger Wheels may be needed to stop the Flex if you like to corner more than 10 MPH.

Sdude
12-08-2013, 09:38 PM
I do have a couple of them. Driver quality. Send me a PM.

55 56 PREZ 4D
12-08-2013, 10:27 PM
Put "GOOP" or similar adhesive on the wheel/rim where the mounting clips contact.
Spread it out thin and even, and let it dry before you replace the wheelcover.

larkregal62
12-08-2013, 10:46 PM
Not sure how to pm email me please at larkregal62@aol.com thanks gordon