Who in PA sells Hawk sheetmetal?

[jeryst]

I need some front floor pans and a passenger side rocker panel for a 57 Golden Hawk.

Anybody in PA carry those in stock?

[Captain Billy]

LeRoy Carey made the floors for my 53:
Cary's fabricating service ph 804 241 5920
5270 dennisville rd.
amelia, va. 23002

Otherwise it's Classic Enterprises

[StudeRich]

You most likely will not get the option of finding these "next door"!

Most are right here:

http://www.classicent.com/studebaker.php

[wdills]

I have bought floor pieces from Classic Enterprises and LeRoy Carey. Leroy makes a much better product, but his price is also much higher. Either way you will have to wait a while to get them. Classic is normally about 2 or 3 weeks to ship. With Leroy, it depends on if he has any sitting on the shelf. When I bought mine he had to make them and it took almost 2 months.

[rockne10]

Those are your two options, in PA or anyplace else; unless you want to try your own fabrication. That has been done.

[jg61hawk]

I only know Classic and I am happy. I did a 61 Hawk that needed floors, and a lot more. Classic was more than I expected.

[warrlaw1]

I ordered my floor pans from Classic as soon as I started to tear the car down. They had 'em in stock and there was no delay.

[Chris Pile]

Clair & Marg Coho in Altoona should have lots of Hawk parts as I understand.
They are in the SDC roster.

[jeryst]

Clair & Marg Coho in Altoona should have lots of Hawk parts as I understand.
They are in the SDC roster.

Does anyone have contact information for them?

How do I access the SDC roster?

[leroy]

My contact info is:

bakermaker@tds.net

804 241 5920

[swvalcon]

A place called classic to classic has them and I think they also sell on e-bay.

[wdills]

I bought a trunk floor from Classic to Current. It was absolute junk. Luckily they had a no questions asked type return policy so I was able to send it back. I then bought pieces from Leroy. His stuff was pretty close right out of the box. I spent about 2 hours with the hammer and dolly to get a really good fit.