rocker trim

[robtc]

I have a 63 GT Hawk and I am putting some trim pieces back on. Of course I can't find the screws that I carefully set aside so I wouldn't lose them.

What screw size is used to attach the rocker panel trim (runs from wheel well to wheel well below the door) on the Hawk? And, what type of head does the screw have?

Thanks.

[64V-K7]

I believe the original screws are pan head #8X32 and you can get these or flat head in stainless at Lowes hardware

Bob Johnstone

[64V-K7]

I believe the original screws are pan head #8X32 and you can get these or flat head in stainless at Lowes hardware

Bob Johnstone

[starlightchamp]

The metal screws in my 63 Hawk GT lower molding are #6, countersunk, oval head , stainless.
,,,Dick Curtis

[starlightchamp]

The metal screws in my 63 Hawk GT lower molding are #6, countersunk, oval head , stainless.
,,,Dick Curtis