Announcement

Collapse
No announcement yet.

First car radio was installed in a Studebaker

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • First car radio was installed in a Studebaker

    I checked to see if this story had been posted here before, but I couldn't find it.

    HISTORY OF THE CAR RADIO

    Seems like cars have always had radios, but they didn't. Here's the true story:

    One evening, in 1929, two young men named William Lear and Elmer Wavering drove their girlfriends to a lookout point high above the Mississippi River town of Quincy, Illinois to watch the sunset. It was a romantic night to be sure, but one of the women observed that it would be even nicer if they could listen to music in the car.

    Lear and Wavering liked the idea. Both men had tinkered with radios (Lear had served as a radio operator in the U.S. Navy during World War I) and it wasn't long before they were taking apart a home radio and trying to get it to work in a car.
    But it wasn't as easy as it sounds: automobiles have ignition switches, generators, spark plugs, and other electrical equipment that generate noisy static interference, making it nearly impossible to listen to the radio when the engine was running.
    One by one, Lear and Wavering identified and eliminated each source of electrical interference. When they finally got their radio to work, they took it to a radio convention in Chicago .
    There they met Paul Galvin, owner of Galvin Manufacturing Corporation. He made a product called a "battery eliminator" a device that allowed battery-powered radios to run on household AC current. But as more homes were wired for electricity more radio manufacturers made AC-powered radios. Galvin needed a new product to manufacture.
    When he met Lear and Wavering at the radio convention, he found it. He believed that mass-produced, affordable car radios had the potential to become a huge business.

    Lear and Wavering set up shop in Galvin's factory, and when they perfected their first radio, they installed it in his Studebaker. Then Galvin went to a local banker to apply for a loan. Thinking it might sweeten the deal, he had his men install a radio in the banker's Packard. Good idea, but it didn't work -- Half an
    hour after the installation, the banker's Packard caught on fire. (They didn't get the loan.)
    Galvin didn't give up. He drove his Studebaker nearly 800 miles to Atlantic City to show off the radio at the 1930 Radio Manufacturers Association convention.
    Too broke to afford a booth, he parked the car outside the convention hall and cranked up the radio so that passing conventioneers could hear it. That idea worked -- He got enough orders to put the radio into produc
    That first production model was called the 5T71. Galvin decided he needed to come up with something a little catchier. In those days many companies in the phonograph and radio businesses used the suffix "ola" for their names - Radiola, Columbiola, and Victrola were three of the biggest. Galvin decided to do the same thing, and since his radio was intended for use in a motor vehicle, he decided to call it the Motorola. But even with the name change, the radio still had problems:
    When Motorola went on sale in 1930, it cost about $110 uninstalled, at a time when you could buy a brand-new car for $650, and the country was sliding into the Great Depression. (By that measure, a radio for a new car would cost about $3,000 today.)
    In 1930 it took two men several days to put in a car radio -- The dashboard had to be taken apart so that the receiver and a single speaker could be installed, and the ceiling had to be cut open to install the antenna. These early radios ran on their own batteries, not on the car battery, so holes had to be cut into the floorboard to accommodate them. The installation manual had eight complete diagrams and 28 pages of instructions.
    Selling complicated car
    radios that cost 20 percent of the price of a brand-new car wouldn't have been easy in the best of times, let alone during the Great Depression --

    Galvin lost money in 1930 and struggled for a couple of years after that. But things picked up in 1933
    when Ford began offering Motorola's pre-installed at the factory.
    In 1934 they got another boost when Galvin struck a deal with B.F. Goodrich tire company to sell and install them in its chain of tire stores.
    By then the price of the radio, installation included, had dropped to $55. The Motorola car radio was off and running. (The name of the company would be officially changed from Galvin Manufacturing to "Motorola" in 1947.)
    In the meantime, Galvin continued to develop new uses for car radios.
    In 1936, the same year that it introduced push-button tuning, it also introduced the Motorola Police Cruiser, a standard car radio that was factory preset to a single frequency to pick up police broadcasts.
    In 1940 he developed with the first handheld two-way radio -- The Handie-Talkie -- for the U. S.
    Army.

    A lot of the communications technologies that we take for granted today were born in Motorola labs in the years that followed World War II.
    In 1947 they came out with the first television to sell under $200. In 1956 the company introduced the world's first pager; in 1969 it supplied the radio and television equipment that was used to televise Neil Armstrong's first steps on the Moon. In 1973 it invented the world's first handheld cellular phone.
    Today Motorola is one of the largest cell phone manufacturer in the world -- And it all started with the car radio.
    The two men who installed the first radio in Paul Galvin's car, Elmer Wavering and William Lear, ended up taking very different paths in life.
    Wavering stayed with Motorola. In the 1950's he helped change the automobile experience again when he developed the first automotive alternator, replacing inefficient and unreliable generators. The invention lead to such luxuries as power windows, power seats, and,eventually, air-conditioning.

    Lear also continued inventing. He holds more than 150 patents. Remember
    eight-track tape players? Lear invented that.
    But what he's really famous for are his contributions to the field of aviation. He invented radio direction finders for planes, aided in the invention of the autopilot, designed the first fully automatic aircraft landing system, and in 1963 introduced his most famous invention of all, the Lear Jet, the
    world's first mass-produced, affordable business jet. (Not bad for a guy who dropped out of school after the eighth grade.)

  • #2
    Yep: http://forum.studebakerdriversclub.c...ght=transitone



    Craig
    Last edited by 8E45E; 10-08-2012, 06:44 PM.

    Comment


    • #3
      Going to depend on your search terms.

      Brad Johnson,
      SDC since 1975, ASC since 1990
      Pine Grove Mills, Pa.
      '33 Rockne 10, '51 Commander Starlight. '53 Commander Starlight
      '56 Sky Hawk in process

      Comment


      • #4
        Some additional information for your consideration. Studebaker began to wire their Commander and President closed models for radio in March 1930. This would have been the 1930 models FE and FH Presidents and Commander GJ and FD. The lead wire came through the left front pillar to the chicken wire in the roof which acted as the “antenna.” This would allow for the installation of any brand of radio though at the time Studebaker was not offering a specific brand or model.

        The first radio offered by Studebaker was a model 7 Philco Transitone officially introduced on June 3, 1931, it was given a part number of AC-3. As noted in the photo in the previous thread the head was mounted on the far right side of the instrument panel accessible only to the passenger. The radio box (i.e. tubes) was secured in the center of the firewall. In April 1932 a new Philco Transitone Super Heterodyne unit was adopted and offered with a steering column mounted head so it could be operated conveniently by the driver. The price was $69.50 installed ($5.00 more west of the Mississippi). Studebaker continued using the Philco brand right on through the post war years though Motorola offered a replacement “aftermarket” radio in the late 30s.
        Richard Quinn
        Editor emeritus: Antique Studebaker Review

        Comment


        • #5
          Originally posted by Studebaker Wheel View Post
          The price was $69.50 installed ($5.00 more west of the Mississippi).
          Richard, can I get one of these for the Rockne?
          Brad Johnson,
          SDC since 1975, ASC since 1990
          Pine Grove Mills, Pa.
          '33 Rockne 10, '51 Commander Starlight. '53 Commander Starlight
          '56 Sky Hawk in process

          Comment


          • #6
            Click image for larger version

Name:	rockne accessory bulletin.jpg
Views:	1
Size:	98.8 KB
ID:	1675671
            Yes, simply order from your Rockne Parts and Accessory catalog.
            Richard Quinn
            Editor emeritus: Antique Studebaker Review

            Comment


            • #7
              SWEET!
              Order submitted via Paypal!

              All kidding aside, the Rocknes were advertised as wired for radio, indicating the lead from the rooftop chicken wire was installed in the left front pillar. I haven't found evidence of it yet but, haven't fully disassembled to determine its absence. The chicken wire, isolated from the body by its attachment to the wood framed roof, and being the highest point in the body should be a viable antenna. Were the antennas installed under the running boards, being in a low position, more or less effective?
              Brad Johnson,
              SDC since 1975, ASC since 1990
              Pine Grove Mills, Pa.
              '33 Rockne 10, '51 Commander Starlight. '53 Commander Starlight
              '56 Sky Hawk in process

              Comment


              • #8
                Most of the things that are mentioned above i must say i truly don't know about them......... But now i do ......... so i was in doubt for where to ask this question isn't there supposed to be any new member introduction area in the forums so first the new comers may give an introductory post and then after that u know .................. so i looked up for that and didn't found the thread and i apologize for the inconvenience if someone felt because of me..

                Comment


                • #9
                  Originally posted by HyBall View Post
                  so i was in doubt for where to ask this question isn't there supposed to be any new member introduction area in the forums so first the new comers may give an introductory post and then after that u know
                  The 'New Memeber' thread is perpetually at the top of this 'General Studebaker Discussion' category.

                  Craig

                  Comment


                  • #10
                    Hey... Don't worry at all about it John...
                    We're just glad to have you hang around here and post stuff.
                    Sure, things get posted several times. So what. It's about sharing.
                    Having a 'quality' thread header is most important, because it does help later on if someone is looking back to find a nugget of info.
                    Some headers posted on the forum are so generic, they don't mean anything from that day, let alone next year.
                    Welcome to the forum... Post on!
                    Jeff


                    Originally posted by HyBall View Post
                    Most of the things that are mentioned above i must say i truly don't know about them......... But now i do ......... so i was in doubt for where to ask this question isn't there supposed to be any new member introduction area in the forums so first the new comers may give an introductory post and then after that u know .................. so i looked up for that and didn't found the thread and i apologize for the inconvenience if someone felt because of me..
                    HTIH (Hope The Info Helps)

                    Jeff


                    Get your facts first, and then you can distort them as much as you please. Mark Twain



                    Note: SDC# 070190 (and earlier...)

                    Comment


                    • #11
                      Originally posted by rockne10 View Post
                      Were the antennas installed under the running boards, being in a low position, more or less effective?
                      They were much less effective, being blocked by much of the car and the wheels. Plus they were prone to connection corrosion and being bashed up by road hazards, Additionally, since they were horizontal rather than vertical, that limited their sensitivity as well as causing them to be directional.
                      RadioRoy, specializing in AM/FM conversions with auxiliary inputs for iPod/satellite/CD player. In the old car radio business since 1985.


                      10G-C1 - 51 Champion starlight coupe
                      4H-K5 - 53 Commander starliner hardtop
                      5H-D5 - 54 Commander Conestoga wagon

                      Comment

                      Working...
                      X