PDA

View Full Version : Rear spring bushings



Lenny R2
09-23-2012, 07:57 PM
ON my 62 Champ 7E 1/2 ton i installed some rear spring bushings one end of the
bushing is flush with the spring eye the other end sticks out between 1/4 to 3/8
of a inch is this normal.

Alan
09-23-2012, 08:03 PM
Yes it is. The spring is never straight from front to rear. The front of the spring locating pin wiggles around a bit when putting in the rivets. The shackles in the rear are slightly larger than the bushings to compensate.