PDA

View Full Version : The butt stops here



candbstudebakers
01-08-2012, 11:44 AM
Here is a pair of rust free "C" cabs waiting for new homes one is a 59 and the other is a 51

http://i691.photobucket.com/albums/vv271/canbstudebakers/IM004034-1.jpg

kmac530
01-08-2012, 02:20 PM
Hey Bob,
I know you like to sell more complete parts and I am not asking you to break down a door into parts when you have a complete set up, but it is worth asking, do you have a complete drivers side C-cab window including the SS vent window divider moulding?
I could also use an unbroken passenger glass only. I think the glass is the same left and right.

I can find glass online for a reasonable $75, but the shipping is $50-75. Yikes.

If you dont have it, does ANYONE else have any, especially the divider SS trim?????? Glass is available....its only money right.

SilverHawkDan
01-08-2012, 03:00 PM
Bob,
PM sent.
Dan

candbstudebakers
01-09-2012, 01:40 AM
Hey Bob,
I know you like to sell more complete parts and I am not asking you to break down a door into parts when you have a complete set up, but it is worth asking, do you have a complete drivers side C-cab window including the SS vent window divider moulding?
I could also use an unbroken passenger glass only. I think the glass is the same left and right.




I can find glass online for a reasonable $75, but the shipping is $50-75. Yikes.

If you dont have it, does ANYONE else have any, especially the divider SS trim?????? Glass is available....its only money right.

Kelly I just last week sold a pair of nice stainless dividers and shipped them to Long Beach, might have some glass but shipping glass is a crap shoot...Bob

Bish
01-09-2012, 08:46 AM
Hey Bob,
I know you like to sell more complete parts and I am not asking you to break down a door into parts when you have a complete set up, but it is worth asking, do you have a complete drivers side C-cab window including the SS vent window divider moulding?
I could also use an unbroken passenger glass only. I think the glass is the same left and right.

I can find glass online for a reasonable $75, but the shipping is $50-75. Yikes.

If you dont have it, does ANYONE else have any, especially the divider SS trim?????? Glass is available....its only money right.


My local glass co. cut all four side glass pieces for me, using my old as templates for $100.
you should be able to get that done and avoid shipping entirely.
Bish

kmac530
01-09-2012, 06:11 PM
I am sure, being flat that there are people who could cut it. It just does not do much good with out the bottom mount slider and the divider. Well it could be used without the divider, but not the lifting guide piece.

I was hoping if he had it all i would ride or drive up and meet him, visit for a bit, see his cool stuff and pick up the stuff I need. But oh well. Day late and a dollar short.

candbstudebakers
01-09-2012, 11:59 PM
Kelly I said I sold the dividers not the bottom slide supports.

Bo Markham
01-10-2012, 09:50 AM
Here is a pair of rust free "C" cabs waiting for new homes one is a 59 and the other is a 51

http://i691.photobucket.com/albums/vv271/canbstudebakers/IM004034-1.jpg

Bob,

If I could figure out a way to get that 59 cab to Florida without it costing an arm and a leg and two kidneys, I'd love to have it. Are you coming this way anytime, soon? Bo

candbstudebakers
01-10-2012, 10:56 AM
Bo, I have nothing planned until July in South Bend , but then I would be taking the motor home with a car on the trailer, I could always plan a quick trip if I sold enough large items to make it worth while, by the way what ever happened with the guy looking for Avanti rear 1/4 windows? I send you an e-mail that I have them but never heard back...Bob

kmac530
01-11-2012, 10:42 AM
Kelly I said I sold the dividers not the bottom slide supports.

Cool Bob, I want the window slider rail thingamajiggy. PM sending

warrlaw1
01-11-2012, 12:30 PM
Hey, Bob. Good to hear you are going to SB in July. I'm going to drive there, too, if it kills me :)

candbstudebakers
01-12-2012, 12:57 AM
Dave , Ya we will be there dogs and all. just not sure what car I might have on the trailer.

mbstude
01-12-2012, 01:31 AM
Hey Bo, email sent.. I've got a cab that needs to be put to use.

Skip Lackie
01-12-2012, 03:07 PM
Kelly-
I have a good driver's side C-cab window complete with the divider and support. I have the complete pass side, too, but the window is broken, though still intact -- could be used as a pattern. Or I could break out the glass and just send the L-shaped divider and support. Either way, shipping would be expensive. Lemme know if interested.

Skip