NEEDED AT SB- Crossmember for Lark

[bams50]

Got the trans. out of Molly (more on that later)... the crossmember is severely battered; usable, but would really like to get a straight one and a new trans. mount to put back in at the meet!

Keep me in mind if you have one or see one there

Robert K. Andrews Owner- IoMT (Island of Misfit Toys!)
Parish, central NY 13131

http://www.cardomain.com/ride/2358680/1

[rockinhawk]

will one from a 63 cruiser work? I have one out but willhave to check it's condition. NT


Neil Thornton
Hazlehurst, GA
'57 Silver Hawk
'56 Sky Hawk
'51 2R16 dump truck
Many others.

[rockinhawk]

will one from a 63 cruiser work? I have one out but willhave to check it's condition. NT


Neil Thornton
Hazlehurst, GA
'57 Silver Hawk
'56 Sky Hawk
'51 2R16 dump truck
Many others.

[bams50]

Sorry to say, I have no idea...[:I]

If it'll fit, I certainly will be interested! Will you bring it to SB?

Robert K. Andrews Owner- IoMT (Island of Misfit Toys!)
Parish, central NY 13131

http://www.cardomain.com/ride/2358680/1

[bams50]

Sorry to say, I have no idea...[:I]

If it'll fit, I certainly will be interested! Will you bring it to SB?

Robert K. Andrews Owner- IoMT (Island of Misfit Toys!)
Parish, central NY 13131

http://www.cardomain.com/ride/2358680/1

[mbstude]

quote:If it'll fit, I certainly will be interested! Will you bring it to SB?

Sure Robert, if it's good to use I'll stick it in the back of the orange truck.

Matthew Burnette
'59 Scotsman
'63 Daytona
Hazlehurst, GA

[mbstude]

quote:If it'll fit, I certainly will be interested! Will you bring it to SB?

Sure Robert, if it's good to use I'll stick it in the back of the orange truck.

Matthew Burnette
'59 Scotsman
'63 Daytona
Hazlehurst, GA

[Randy_G]

My 2 cents, the frames of a 62 is the same width as a 59. I have a 62 frame, it was a doner to nearly all of my 59 componets. So what is the differnce in a 63 and 62 frame?

Randy_G
1959 Lark Sedan

https://www.AutomotiveHistoryOnline.com

[Randy_G]

My 2 cents, the frames of a 62 is the same width as a 59. I have a 62 frame, it was a doner to nearly all of my 59 componets. So what is the differnce in a 63 and 62 frame?

Randy_G
1959 Lark Sedan

https://www.AutomotiveHistoryOnline.com

[mbstude]

Robert; just got back from the shop and pulled this one off a '63 Cruiser. If it looks like it'll work, I'll stick it in the truck and bring it to ya.






Matthew Burnette
'59 Scotsman
'63 Daytona
Hazlehurst, GA

[mbstude]

Robert; just got back from the shop and pulled this one off a '63 Cruiser. If it looks like it'll work, I'll stick it in the truck and bring it to ya.






Matthew Burnette
'59 Scotsman
'63 Daytona
Hazlehurst, GA

[bams50]

Looks like it, Matthew! You'll probably be there just as I'm gettin' ready to put it in[8D]

Robert K. Andrews Owner- IoMT (Island of Misfit Toys!)
Parish, central NY 13131

http://www.cardomain.com/ride/2358680/1

[bams50]

Looks like it, Matthew! You'll probably be there just as I'm gettin' ready to put it in[8D]

Robert K. Andrews Owner- IoMT (Island of Misfit Toys!)
Parish, central NY 13131

http://www.cardomain.com/ride/2358680/1

[Tom Bredehoft]

I hope you or someone has a method to put lubricant in the tranny after installation. I spent way too long today putting in not enough to fill mine. I'll turn up somewhere in St. Joseph County Monday evening.

[img=left]http://www.alink.com/personal/tbredehoft/Bothcars.jpg[/img=left]
Tom Bredehoft
'53 Commander Coupe
'60 Lark VI
'05 Legacy Ltd Wagon
All three Indiana built OD cars

[Tom Bredehoft]

I hope you or someone has a method to put lubricant in the tranny after installation. I spent way too long today putting in not enough to fill mine. I'll turn up somewhere in St. Joseph County Monday evening.

[img=left]http://www.alink.com/personal/tbredehoft/Bothcars.jpg[/img=left]
Tom Bredehoft
'53 Commander Coupe
'60 Lark VI
'05 Legacy Ltd Wagon
All three Indiana built OD cars