Engine and transmission needed for 62 GT Hawk

[cwinston]

I picked up a project 62 GT Hawk and need an engine and transmission. Would prefer an R1 with 4 speed. Any help in locating one would be greatly appreciated.

[Corvanti]

a little saturday "bump"...

[cwinston]

I have the transmission and bellhousing, but still looking for an engine.

[52-fan]

Since an R-1 would not be stock for a 62 anyway you would probably have better luck buying a standard 289 and doing some upgrades. An R-1 will be harder to find, but you never know when one might come up for sale.

[cwinston]

Since an R-1 would not be stock for a 62 anyway you would probably have better luck buying a standard 289 and doing some upgrades. An R-1 will be harder to find, but you never know when one might come up for sale.

I would definately consider doing exactly that, would also travel a bit to get it, if anyone has a deccent 289 within 300 miles of Warrenton, VA please let me know.

[jackb]

I have a very good 63' Cruiser 289 with OD and all new clutch if you could go that way instead of 4sp....

[cwinston]

jackb - PM sent

[00RACER]

Check your pm

[ed j ellis]

i have a complete restored rolling 1962 chassis with the stock driveline you are looking for.

[cwinston]

i have a complete restored rolling 1962 chassis with the stock driveline you are looking for.

PM sent - thank you