PDA

View Full Version : Bellhousing cross shaft needed.



52-fan
09-12-2010, 10:00 PM
As part of our attempt at putting a T5 transmission in Joe 's pickup, we need a throwout bearing cross shaft. The shaft we need fits the truck bellhousing that was used in V-8 pickups 1954-59 with a 3 speed transmission and some E series trucks. Anybody got one you don't need?

dusty taylor
09-13-2010, 05:10 PM
Hi i think i mite have one will have to check. Can you tell me how long it is. Dusty

52-fan
09-13-2010, 07:47 PM
I think Joe had a measurement from the bell. When he gets in from work I will find out. He would have had the one in the truck, but he used this bellhousimg to keep from taking the truck off the road as long.
more: Joe says that the parts book has 11 9/16" for the shaft he needs.

glassfrog
04-17-2013, 05:49 AM
Thinking about doing something like that. I have a 61 bell housing,flywheel and 3 speed sitting in the garage and am suffering with the BW automatic in my 55. Which t5 did you use and out of what kind of car.

52-fan
04-17-2013, 08:08 AM
The T5 is out of a Chevy S-10 pickup. He has the truck back together now and it drives great. I followed him on a loop around our area to check the speedometer and he likes it a lot.

rkapteyn
04-17-2013, 08:18 AM
I stock a lot of shafts like that inventoried but I need part numbers to get you the correct one.
Robert Kapteyn
studebaker@mac.com